 Brake upgrade question, will I need a brake bias |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| smrz914 |
 Jul 26 2005, 10:45 PM
Post
#1
|
|
Soon to be brightening the life of the person behind you.  Group: Members Posts: 456 Joined: 21-April 03 From: Pleasant Hill, CA or Chico, CA Member No.: 596  |
So I dropped off my stuff at the platers today and orderd parts so I'm hoping that i'll have everything by the end of the week. I useto have a 911 front end with "A" calipers and stock rear calipers. I saw the threads on the 911 rear brake upgrades so I decided to do that. So all the stuff is coming together. I took the stock proportioning valve out when I put the 5.8L in the car because it wouldn't fit. I just have a T in there now.
So when I put the 911 front end on I got a 19mm master cylinder. My question is whether or not I need a proportioning valve with the bigger rear brakes? Will it be a trial and error thing for when I get the car back on the road? |
   |
 
|
Posts in this topic
smrz914 Brake upgrade question Jul 26 2005, 10:45 PM
lapuwali It would be a good idea. They're small, and t... Jul 27 2005, 09:38 AM ewdysar Most V8 conversions run the "T" with 911 fronts, 1... Jul 27 2005, 10:48 AM SirAndy <... Jul 27 2005, 11:07 AM smrz914 Trial and error it is!
So is there a way to ... Jul 27 2005, 02:17 PM Eric_Shea Measure pistons and you can slot yourself in a mod... Jul 27 2005, 02:47 PM
smrz914 Fronts are ~48mm and rears are ~38mm, I didn't... Jul 27 2005, 08:22 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 11:42 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.