 Trailing arm movement |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dwillouby |
 May 11 2022, 08:26 AM
Post
#1
|
|
Member  Group: Members Posts: 393 Joined: 27-December 02 From: Mt Washington, KY Member No.: 29 Region Association: None 
 |
Hello,
While working on upgrading my brakes I found that the right trailing arm has about 1/8 - 1/4 side to side movement. The shafts and bushing came from PMS both nuts are tight. Haven't dissembled but think the bushing face may be at fault? Thanks David |
   |
 
|
Posts in this topic
dwillouby Trailing arm movement May 11 2022, 08:26 AM
brant usually it means the trailing arm hole or "ea... May 11 2022, 09:47 AM
SirAndy
usually it means the trailing arm hole or "e... May 11 2022, 11:22 AM mskala It's possible to have axial movement if the le... May 11 2022, 11:36 AM dwillouby
It's possible to have axial movement if the l... May 11 2022, 11:48 AM 914_teener
Hello,
While working on upgrading my brakes I fo... May 11 2022, 01:12 PM dwillouby
Hello,
While working on upgrading my brakes I f... May 11 2022, 02:16 PM mskala With no load on the arm and with plastic bushings,... May 11 2022, 04:23 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 02:29 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.