 Rocker Cover Screws, Which screws on the underside? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
Model Specific Information
914/4: 70 71 72 73 74 75 76 914/6: 70 71 72
| Arno914 |
 Jun 2 2022, 01:51 AM
Post
#1
|
|
Member  Group: Members Posts: 233 Joined: 13-May 20 From: near Frankfurt, Germany Member No.: 24,260 Region Association: Germany 
 |
Hello,
on my 1971/-4 I recently cleaned and resprayed the rocker covers. On the top I have the correct hardware to attach them, plastic rivets and screws with spacers on each end under the fender lips. In the bottom part, there are three large holes in the covers, apparently for M6 (?) size bolts (3 each side). On my car however, there where 3 holes randomly drilled to attach the covers with small sheet metal screws. Seems to be "original". The fit is correct. Question: Did the factory attach the underside of the covers this way? On the early cars maybe? Are there nuts in the longs for larger screws on "later" cars? (Mine doesn´t have them. I added rubber spacers to help drain water and dirt upon reassembly. Greetings, Arno (IMG:http://www.914world.com/bbs2/uploads_offsite/up.picr.de-24260-1654156260.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/up.picr.de-24260-1654156261.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/up.picr.de-24260-1654156262.3.jpg) |
   |
 
|
Posts in this topic
Arno914 Rocker Cover Screws Jun 2 2022, 01:51 AM
wonkipop don't know whats going on there.
the big holes... Jun 4 2022, 04:28 PM
Pat Garvey
don't know whats going on there.
the big hole... Jun 4 2022, 04:35 PM Arno914
Thanks for checking into this. I double checked ... Jun 5 2022, 09:48 AM wonkipop @Arno914
yes - my factory manual in english has ... Jun 5 2022, 04:32 PM Arno914 Thank you, wonkipop!
We will drive to England... Jun 6 2022, 03:57 AM zoomCat The PET lists ‘pan head screws’ for the side v... Dec 29 2022, 01:59 PM StarBear My best guess (as it happened to mine), the origin... Dec 29 2022, 02:15 PM windforfun Make sure you don't put any holes in your heat... Dec 29 2022, 02:54 PM rhodyguy Change to hex head screws. I used stainless. Feb 3 2023, 08:16 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:23 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.