Is anyone familiar with FoMoCo Engine Builders out of Milwaukee? Options

[9144me2enjoy]

They’re offering this for $7799.00….Is anyone familiar with this company etc.?

Outlaw Street Complete 2276cc Motor
# MFC-CE2276OS Mofoco
All new case engines are currently at a minimum of 24 weeks lead time. Rebuilt case engines are currently at a minimum of 16 weeks lead time. We are a family owned, performance, custom-build shop... and quality takes time. Buy with confidence directly from the engine builder. Mofoco has over 55 years of experience in the VW industry building aircooled VW engines.
Outlaw Street Complete 2276cc Motor
This is the Complete version of our most popular stroker motor configuration. The 2276cc Outlaw Street Motor built by Mofoco to be the best street performance motor you can buy. It delivers the horsepower you are looking for, but still has the reliability you need. This motor is built with all new components and features Mofoco's exclusive 050 heads with D-shaped intake ports and is also the only VW aircooled cylinder head completely manufactured in the USA.All motors are priced with no exhaust so you can choose the option that best fits your needs


Features:

New Magnesium Engine Case
New 82mm 4340 Chromoly Counterweighted Crankshaft
New 94mm Pistons & Barrels
New Chromoly I-Beam Rods
New Lifters
New Engle W120 Performance Cam
New Mofoco "050" cylinder heads D - Shaped intake port; made purely in USA!
New Dual Weber 44 Carburetors
12LB Forged Lightened Flywheel - 8 Dowelled
New Solid Rocker Shafts
New Stock Doghouse Fan Shroud
New Doghouse Oil Cooler
New Alternator
New Filter Pump with spin on oil filter
New 009 Distributor
New Fuel Pump
Test run and tuned before leaving our facility
All engines come with a 12 month warranty.
All Motors are Test Run at our facility before going out the door. With a complete, its the best way to go because we do all the initial work and all you have to do is the install. We run the motor for one to two hours and check anything and everything possible. We check the valves 2-3 times, we set the timing, adjust and sync the carbs, check the compression, check the oil pressure, and the initial break-in on the cam is done.