 getting webers to work correctly |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jgilliam914 |
 Aug 7 2025, 08:18 AM
Post
#1
|
|
914 Guru  Group: Members Posts: 5,368 Joined: 30-July 12 From: Iowa / Florida Member No.: 14,732 Region Association: Upper MidWest  |
44IDF ...I rebuilt them (first timer) and I can't get enough fuel to flow through them. What are my next steps and who could I send them to to get them set up correctly?
|
   |
 
|
Posts in this topic
Jgilliam914 getting webers to work correctly Aug 7 2025, 08:18 AM
Jgilliam914 float height was off so I will adjust this and see... Aug 7 2025, 09:15 AM
ctc911ctc According to:
https://www.performanceoriented.com... Aug 7 2025, 09:30 AM Superhawk996
44IDF ...I rebuilt them (first timer) and I can... Aug 7 2025, 09:51 AM Jgilliam914
44IDF ...I rebuilt them (first timer) and I can... Aug 7 2025, 09:59 AM Superhawk996
[quote name='Superhawk996' post='3218340' date='A... Aug 7 2025, 10:04 AM Jgilliam914
[quote name='Superhawk996' post='3218340' date='... Aug 7 2025, 10:17 AM Chad911sc I think if I remember correctly I set mine at 10.5... Aug 7 2025, 10:00 AM Superhawk996 Those Venturis are ridiculously large for 2150 cc.... Aug 7 2025, 10:23 AM 930cabman
Those Venturis are ridiculously large for 2150 cc... Aug 7 2025, 02:53 PM porschetub
Those Venturis are ridiculously large for 2150 cc... Aug 7 2025, 08:36 PM brant street car with street cam?
you'll need much ... Aug 7 2025, 10:23 AM Superhawk996 Here’s the standard venturi selection chart for ... Aug 7 2025, 10:30 AM Superhawk996 Download the Weber tuning guide and spend some tim... Aug 7 2025, 10:33 AM Jgilliam914
Download the Weber tuning guide and spend some ti... Aug 7 2025, 10:35 AM VaccaRabite I had dual 44s on my 2056 for a while. 32mm vents... Aug 7 2025, 10:37 AM DennisV
What are my next steps and who could I send them ... Aug 7 2025, 12:44 PM NARP74 Trust the knowledge-base here. You will disagree ... Aug 7 2025, 04:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th August 2025 - 06:22 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.