 Advance 123 distributor and GoWesty throttle body, Questions about the install... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| TRP |
 Apr 21 2026, 10:50 AM
Post
#1
|
|
Member  Group: Members Posts: 310 Joined: 2-September 23 From: Morgan Hill, CA Member No.: 27,559 Region Association: None 
 |
Hey Gang!
I am about to stuff the 2056 back into my car and I wanted to double check a few things before I dive head long into this thing. My A123 has a vacuum port on the side of the distributor body. The GoWesty throttle body also has the vacuum port. I assume I connect the TB to the A123 ports and I'm good to go. I ask because there are lots of comments about 'if the port is before / after the throttle blade. The port appears to be in the same approximate location as the stock 1.8 TB, so I think this is correct. Second question, with the 2056 and the Raby "FI compatible" cam, the rest is stock L-Jet FI (I moved the TPS over to the GWTB) -- which of the pre-programmed advance curves should I be selecting in the A123? Thank you! Ted   |
   |
 
|
Posts in this topic
  |
3 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
2 Members: Lockwodo, Craigers17
|
Lo-Fi Version | Time is now: 21st April 2026 - 04:03 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.