 Can this be save ?, Cylinder Head and Cylinder Jug |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| young55961 |
 Jun 23 2026, 03:54 PM
Post
#1
|
|
Newbie  Group: Members Posts: 42 Joined: 15-March 18 From: Arcadia Member No.: 21,972 Region Association: Southern California  |
I removed the cylinder heads today and found some metal damage in the #1 combustion chamber.
Can this head be repaired? There is a machine shop near me that does cylinder head repairs, but I'm not sure if they have experience repairing these Type 4 heads. Does anyone have a recommendation for a good machine shop in the Los Angeles area?  I also found heavy scoring in the #4 cylinder. The cylinder wall is very rough.  I think I'll need a new piston and cylinder set. I measured the piston at 93.3 mm, which I believe is the stock size for a 2.0L engine. I'm looking at this kit. Is this the correct one for a stock 2.0L? https://www.autohausaz.com/pn/12512365-AA-1...uxoC63oQAvD_BwE |
   |
 
|
Posts in this topic
young55961 Can this be save ? Jun 23 2026, 03:54 PM
Chad911sc You could take those cylinders and have them bored... Jun 23 2026, 04:24 PM  |
5 User(s) are reading this topic (3 Guests and 1 Anonymous Users)
1 Members: 930cabman
|
Lo-Fi Version | Time is now: 23rd June 2026 - 06:55 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.