 Can I hot wire start at the starter?, Quick shortcut needed |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| robkammer |
 Jul 31 2026, 03:48 PM
Post
#1
|
|
Robbo  Group: Members Posts: 282 Joined: 7-January 21 From: Vermilion Ohio Member No.: 25,049 Region Association: NineFourteenerVille  |
All: Working through a new motor break in period. Hit a snag where I need to run the Motor with the cart in the air, without the front mounting bracket in place. Seems the tight motor is taxing the starter, and might have ,(probably did) smoke the ignition switch.
I have two things on order, a starter relay kit, and a new switch. However, I would like to run it once more while on the lift to video the leaking oil pump. The question:with the key on, the car in the air, can I jumper the large starter contact and one of the solenoid contacts to get the starter cranking? I used to do this on Fords all of the time, a little jumper on the coil, and a screwdriver to jump the solenoid. Drive away! It took me a few times driving to realize that I needed to pull the speedo cable so my parents didn’t know I took the car. Simple times. At least now I have the key! Robbo |
   |
 
|
Posts in this topic
robkammer Can I hot wire start at the starter? Jul 31 2026, 03:48 PM
Jack Standz You can make one possiblly from spare parts you ha... Jul 31 2026, 04:14 PM
emerygt350 Yes, just grab a screwdriver and hit the top prong... Jul 31 2026, 04:26 PM  |
3 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
1 Members: porschetub
|
Lo-Fi Version | Time is now: 31st July 2026 - 06:10 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.