stripped spark plug |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
stripped spark plug |
Gearren |
Sep 18 2005, 04:02 PM
Post
#1
|
Member Group: Members Posts: 91 Joined: 18-July 04 From: New Bern, NC Member No.: 2,362 |
Well it all happed yesterday while I was just taking the car out for a spin. It was running good, until the car ran BAD all of the sudden, to find out the one of the spark plugs shot out of the cylinder head, neadless to say, the threads are stripped out! So I bought a rethreading kit, and I am going to try to rethread the plug hole while the head is on the engine, in the car. I have head that if you use a heavy grease on the tap, it will catch most of the metal, its worth a try. But what kind of grease should I use, and also, what should I put on the insert so that is will stay in the head and not allow any blow by occur, any ideas, loctite, HB Weld, epoxy, what is the best stuff for this application?
|
Lo-Fi Version | Time is now: 4th June 2024 - 09:43 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |