 Undercoating/Seam sealer removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mr914 |
 Sep 12 2003, 07:30 AM
Post
#1
|
|
914 Hillbilly  Group: Members Posts: 576 Joined: 11-January 03 From: Lincoln NE Member No.: 131 Region Association: None  |
Help!
I'm looking for a better way to remove the damn undercoating in the fenderwells. I tried aviation stripper and it laughed at it. (IMG:style_emoticons/default/laugh.gif) I tried sand blasting - (IMG:style_emoticons/default/headbang.gif) Tried the heat gun, it's way to slow. The only way I've found so far is the wire wheel on the angle grinder --- slow.... But then, how do I get into the nooks and crannies? Also, what's the best way to remove the seam sealer? Any magic bullets? (IMG:style_emoticons/default/fighting19.gif) |
   |
 
|
Posts in this topic
mr914 Undercoating/Seam sealer removal Sep 12 2003, 07:30 AM
tod914 You could try a citrus degreaser to melt it. But,... Sep 12 2003, 07:49 AM Brad Roberts There is NO quick way. You have to use the heat gu... Sep 12 2003, 09:31 AM Jeroen A wire wheel on a drill works good too.
Usually th... Sep 12 2003, 09:45 AM Britain Smith I spent about 30 to 45 mins getting this far in my... Sep 12 2003, 10:38 AM Korijo Heat it w/ a torch, then scrape w/ a putty knife. ... Sep 12 2003, 01:05 PM mr914 I found that citrus degreaser worked like a champ ... Sep 12 2003, 02:27 PM
Lawrence For undercoating - soak with brake cleaner and a s... Sep 12 2003, 02:55 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 11:38 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.