 Powerless, No power under load |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Carlitos Way |
  Jun 16 2006, 12:43 PM
Post
#1
|
|
I did it MY WAY  Group: Members Posts: 1,337 Joined: 14-September 04 From: Simi Valley, CA Member No.: 2,757 Region Association: Southern California  |
I've got a 1.7 block, warmed up to a 2.0 with dual weber carbs. The carbs were jetted per Aircooled.Net specs, and they were just rebuilt by a reputable local carb shop.
When I accelerate, I get absolutely no power. I've replaced the distributor, coil, gas lines, gas pump and made sure the carbs are synchronized. Car idles like a champ. I can stomp on the gas and it revs up nicely. As soon as I put load to it (i.e. let off the clutch), the car bogs down and sputters. Any thoughts/ideas? |
   |
 
|
Posts in this topic
Carlitos Way Powerless Jun 16 2006, 12:43 PM
So.Cal.914 It still thinks it's a 1.7?
Check timing, po... Jun 16 2006, 12:48 PM Carlitos Way Thanks for the quick response. Actually, I forgot... Jun 16 2006, 01:00 PM r_towle Dirty idle jets.
broken/torn accel pump gasket.
Fr... Jun 16 2006, 01:02 PM Toast Do you have the correct size venturies and/or are ... Jun 16 2006, 01:09 PM rhodyguy carbs...40, 44...? what size are the venturis... Jun 16 2006, 01:11 PM ClayPerrine I would also suggest that you do a "float tes... Jun 16 2006, 01:16 PM r_towle I worked with the aircooled.net guys on a beetle..... Jun 16 2006, 01:25 PM rhodyguy enough with the 009 jokes!! we all know th... Jun 16 2006, 01:37 PM obscurity I had the same thing happen on my 1.7 FI.
Turns o... Jun 16 2006, 01:50 PM Pompano Beach 914V8 Sure sounds like an ignition problem. Jun 16 2006, 01:55 PM Cap'n Krusty The car should have adequate power, even with the ... Jun 16 2006, 02:00 PM Carlitos Way Cap'n...
Assuming I was doing the static timi... Jun 16 2006, 02:34 PM
Cap'n Krusty QUOTE
Carlitos Way Weber 40 mm carbs
32mm venturis
F11 Emulsion
52.5... Jun 19 2006, 03:29 PM r_towle I would say.....
But this is me.....
Idle should b... Jun 19 2006, 03:48 PM rhodyguy i don't see any mention of the timing being ve... Jun 19 2006, 04:03 PM scrz914 Just a thought but, are you sure that your brakes ... Jun 19 2006, 04:06 PM Joe Sharp Can you bring the car by my house?
:PERMAGRIN: Joe Jun 19 2006, 04:20 PM Carlitos Way If I could bring the car anywhere, I would... I m... Jun 19 2006, 04:27 PM Joe Sharp I time the 009 motors at 27* and forget about idle... Jun 19 2006, 04:37 PM Carlitos Way Thanks for the feedback. I will definitely give t... Jun 19 2006, 04:38 PM Carlitos Way Plugs were somewhat fouled up from when I first tr... Jun 19 2006, 04:39 PM Joe Sharp What plugs are you running? If you've run the ... Jun 19 2006, 04:55 PM Howard Could you limp over to my place? Jun 19 2006, 04:55 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th July 2025 - 04:15 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.