 shifter bushings, larger bushings |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tom |
 Jun 2 2007, 11:56 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,139 Joined: 21-August 05 From: Port Orchard, WA 98367 Member No.: 4,626 Region Association: None  |
After putting new bushings in the trans bracket for the shifter rod, I still had a lot of slop. Taking it apart and measuring found the following. New Bushings are 0.600 inside dia and 0.815 outside dia. My bracket hole for the bushing is 0.830 and my rod is 0.588. Made another bushing for the rod that is slightly larger. Will get back later to let all know how it turns out.
Also made a couple of bushings for the yoke at the fire wall. Press fit and hone to fit pin. This tightened up that area very well. I used a white delrin material to make the bushings out of as this material is supposed to be good for this type of application.    Later, Tom |
   |
 
|
Posts in this topic
Tom shifter bushings Jun 2 2007, 11:56 AM
Dr Evil Very cool, is the delrin you are using more plyabl... Jun 2 2007, 12:04 PM sean_v8_914 celcon (delrin) is typically stiffer
Tom? Jun 2 2007, 02:55 PM Bartlett 914
I got some bushings form ebay. They fit terribl... Jun 2 2007, 03:14 PM Tom Well, the bushing went in and things work better. ... Jun 5 2007, 09:08 AM Tom Well, it has been over a year and the shifting is ... Oct 27 2008, 10:03 PM Nürburg Nomad Hello 914 World... technically this is my first po... May 9 2010, 10:51 AM bandjoey I got a complete set from Pelican and they fit tig... May 9 2010, 02:48 PM Nürburg Nomad Hmm well I see they have part number PEL-SKS914-03... May 10 2010, 09:46 AM underthetire I bought some from AA a while back, although they ... May 10 2010, 10:40 AM Tom Well, it has been several years now and shifting i... May 10 2010, 01:19 PM
underthetire
Well, it has been several years now and shifting ... May 10 2010, 01:39 PM Nürburg Nomad
Well, it has been several years now and shifting ... May 11 2010, 12:46 AM
Bartlett 914
Well, it has been several years now and shifting ... Dec 7 2011, 05:55 PM ClayPerrine Put in new cone screws. They have a nylon lock ma... May 11 2010, 06:08 AM Vacca Rabite I bought the complete side shift bushing set from ... May 11 2010, 07:40 AM Tom Nomad,
Yes, I would replace the cone screws a... May 11 2010, 11:51 AM Nürburg Nomad
Nomad,
Yes, I would replace the cone screws ... May 11 2010, 02:08 PM rwilner maybe try hitting it with a heat gun to soften it ... May 11 2010, 06:48 PM Nürburg Nomad Okay well everything arrived in short order and I... May 16 2010, 01:05 AM Dave_Darling
So perhaps there's a tool or trick to removin... May 16 2010, 11:52 AM Nürburg Nomad
So perhaps there's a tool or trick to removi... May 27 2010, 03:12 PM Drums66
Soooo any surefire suggestions for getting the ... May 27 2010, 03:59 PM Nürburg Nomad
Soooo any surefire suggestions for getting the... May 27 2010, 10:43 PM kwales Delrin is a great choice for bearings. I've u... May 16 2010, 09:46 AM Nürburg Nomad Update: my 914 officially has all 6 gears function... Jun 3 2010, 05:16 PM Tom It has been over 4 years with these installed and ... Dec 7 2011, 02:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 12:01 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.