 Gas Tank Access Hole Cover |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Spoke |
 Jul 17 2007, 11:56 PM
Post
#1
|
|
Jerry  Group: Members Posts: 6,989 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None 
 |
At the present, I do not have a steering rack protection cover and the fuel lines from the gas tank are vulnerable to road debris through the access hole. So I decided to make a cover for this access hole.
Note the suspension hard point on the left of the hole. This is the only bump in an otherwise flat hole. The cover will need a recess to accomodate this point.  To make the cover, I used 16 gauge steel and made the size of the cover such that it overlapped the hole by about 1/4 inch all round. The small strip will be used to hold the mounting bolts.  |
   |
 
|
Posts in this topic
Spoke Gas Tank Access Hole Cover Jul 17 2007, 11:56 PM
Spoke Welded the securing tab to the cover. Only welded ... Jul 18 2007, 12:08 AM Spoke I made the recess for the suspension pickup with a... Jul 18 2007, 12:11 AM Spoke I would have painted the cover the color of the ca... Jul 18 2007, 12:14 AM
nukepipe
I would have painted the cover the color of the c... Jul 18 2007, 03:53 PM Aaron Cox looks like a 911 style underbody swaybar. (74 and ... Jul 18 2007, 04:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 09:13 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.