 Bosche Blue - did I get the right coil?, concered about resistance |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| swl |
 Aug 31 2007, 04:35 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,409 Joined: 7-August 05 From: Kingston,On,Canada Member No.: 4,550 Region Association: Canada  |
Had the local bug shop order a replacement coil for me. The original OEM coil still is working but I thought I'd replace it to see if that would make starting easier. Based on on conversations here I got a bosch blue. Stock 1.7 engine and (for now) no real performance driving.
The coil doesn't have any number stamped on in it but the box says: 9 224 771 008s The only english words on the coil and box are "without resistance" I know that pertronix wants a coil with resistance around 3 ohms. I measured it (across the low voltage terminals) at just under 2 ohms (maybe 1.8). I then measured the OEM coil and got just over 2 Ohms. So assuming that my meter isn't way out of calibration, it looks like neither coil is suitable for pertronix. Is this indeed the right coil? Do you guys that use pertronix put an external resistor on either the bosch blue or OEM coil? |
   |
 
|
Posts in this topic
swl Bosche Blue - did I get the right coil? Aug 31 2007, 04:35 PM
Cap'n Krusty The one you want is a "BC 12". The Cap... Aug 31 2007, 05:07 PM swl Thank's Cap'n. I'll go have a chin wa... Aug 31 2007, 06:52 PM computers4kids
Do you guys that use pertronix put an external re... Aug 31 2007, 07:01 PM
swl quite a discussion over on the samba. seems like ... Aug 31 2007, 07:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st October 2024 - 07:02 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.