 won't start |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| plost |
 Nov 3 2007, 07:22 PM
Post
#1
|
|
Tom  Group: Members Posts: 8 Joined: 3-November 07 From: canada Member No.: 8,297 Region Association: None  |
My 1.7 914 ran good for 5 years now it won't even fire.I have a 009 distributor with pertronix, no points. I do have a hopped up engine so the guy told me. He could not remember precisely but larger pistons and the heads are not stock. The car was running fine but steadily got harder to start until it wouldn't. The compression is min 120 max 130. The carbs IDF 44 have new kits in and have been soaked. I checked the static timing with an ohm meter, turned distributor clockwise (neg battery and neg coil) until it registered voltage then dropped it, then counter clockwise until voltage registered again so I think I'm close. Spark plug wires are 1-4-3-2. checked em 50 times. Have good spark. Set the valves too TDC .006. What the heck am I missing, spent three days on this and i'm not getting anywhere. Can anybody help me, it's gettin very frustrating.
|
   |
 
|
Posts in this topic
plost won't start Nov 3 2007, 07:22 PM
McMark Set the motor at TDC for #1 (make absolutely doubl... Nov 3 2007, 07:36 PM drive-ability I'm not a air cooled guy but did do tune-up wo... Nov 3 2007, 07:46 PM plost Should I put the mallory with points back in and d... Nov 3 2007, 08:19 PM McMark Does your old Mallory have replaceable springs? T... Nov 3 2007, 08:36 PM Headrage Check the basics...
Are you getting air (probably... Nov 3 2007, 08:46 PM rhodyguy easy dist check. take the dist cap off. there shou... Nov 3 2007, 09:15 PM plost OK thanks everyone I'm gonna put the Mallory b... Nov 3 2007, 10:24 PM McMark Kevin, that's true if the drive gear is instal... Nov 3 2007, 11:24 PM plost OK tried the mallory, dist. spark looks good, not ... Nov 4 2007, 11:40 AM davep That is oil pressure. If the pressure stays up bet... Nov 4 2007, 01:11 PM plost IT ran good last year, not so good this spring. Ha... Nov 4 2007, 02:27 PM davep Gas smell says you are getting fuel into the cylin... Nov 4 2007, 03:06 PM swl hey Tom. Here's something I stumbled on that ... Nov 4 2007, 05:49 PM McMark If the green light is out when the motor starts cr... Nov 4 2007, 06:03 PM plost Got the car running finally, thanks for all the su... Nov 9 2007, 08:04 PM George H. Good to hear
now what was the fix? Nov 9 2007, 08:10 PM
plost I had the PCV lines all crimped and pushed out of ... Nov 9 2007, 08:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 04:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.