 Suspension help, putting the parts together... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VaccaRabite |
 Jan 15 2008, 01:29 PM
Post
#1
|
|
En Garde!  Group: Admin Posts: 13,465 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region  |
I have tried to search to find this info, but a search for "suspension" returns just about every thread in the garage.
At the moment, I am too the point where I am ready to put my suspension back on the car. Currently, the stuff I have are KYBs for shocks/struts. Stock springs on the back. Stock front and rear sway bars. I have, but not installed: I have a new turbo tie rod kit to install. Things that won't change.
wheels are 2.0 fuchs I don't want to go 5 lug I want to use the stock front sway bar. I'd like to lower the car a little, about an inch at most. Car will be a weekend warrior. Occational AX, possibly very occational DE's, but mainly just blasting around the rural roads where I live. Questions: [list] [*]I hear some people say not to run the rear sway, to go with big springs instead. Why? [*]My shocks/struts are not popular, but also not worn out. Do I need to replace them, or is it just a "nice" thing to do. [*]What springs should I buy? I'm a little scattered today, so I hope this makes sence. 3 months to get the car on the road.... Zach |
   |
 
|
Posts in this topic
Vacca Rabite Suspension help Jan 15 2008, 01:29 PM
Rob Ways For a street car with some AX, I'd go with 140... Jan 15 2008, 02:51 PM ChrisNPDrider For rear springs 140s are perfect, gotta have that... Jan 15 2008, 07:23 PM Dave_Darling If you are committed to running the stock front sw... Jan 15 2008, 07:55 PM Vacca Rabite How do you change the torsion bars? I have not se... Jan 15 2008, 09:12 PM Dan (Almaden Valley) Yep. Paragon Products has them here
http://www.p... Jan 15 2008, 09:18 PM Dave_Darling Just about everyone carries them. Just make sure ... Jan 16 2008, 03:02 AM
rhodyguy first, find someone to do the alignment. a shop th... Jan 16 2008, 09:08 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 03:57 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.