 Cam Shaft Geometry, Lift on cam not on valve |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tracks914 |
 Jan 7 2004, 08:54 PM
Post
#1
|
|
Canadian Member  Group: Benefactors Posts: 2,083 Joined: 15-January 03 From: Timmins, Ontario, Canada Member No.: 153 Region Association: None   |
I have my engine apart (1.7) and have measured my cam but I can only find specs valve lift (actual movement of the valve) not cam lift (movement of the vavle divided by rocker ratio)
If I knew the rocker ratio I could figure it out too. I just want to know if my cam is still good. Tx Doug |
   |
 
|
Posts in this topic
tracks914 Cam Shaft Geometry Jan 7 2004, 08:54 PM
Jake Raby divide the valve numbers by 1.3
Thats the gross c... Jan 7 2004, 09:00 PM
tracks914 If I multiply my cam lift by 1.3 I end up with .35... Jan 9 2004, 10:05 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 12:45 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.