 Metal work-dent removal, Ever use a friction disk? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| retrofit |
 Jul 28 2008, 03:24 PM
Post
#1
|
|
Member  Group: Members Posts: 176 Joined: 17-April 04 From: Turlock,Ca Member No.: 1,943  |
I read an article in one of the street rod mags about metal work and they were very big on using a friction disk for shrinking body panels back to their original shape. Very little filler, for most of us, is used.
Anybody use this technique? I have a couple of small bump-outs here and there that will have to be taken down, not pushed back out, like a dent, and using a shrinking technique is what I need, and need to learn. TIA Allen |
   |
 
|
Posts in this topic
retrofit Metal work-dent removal Jul 28 2008, 03:24 PM
messix one of the guys on here has a video he sells on me... Jul 28 2008, 04:53 PM
retrofit
one of the guys on here has a video he sells on m... Jul 28 2008, 06:48 PM scotty b Yes I have one and use it ocassionally. It works, ... Jul 28 2008, 07:48 PM kwales I've got one of John Kelleys disks and it... Jul 28 2008, 08:01 PM Rand John Kelly posted not too long ago and included a ... Jul 28 2008, 08:07 PM Rand Bingo, found it:
Thread here:
http://www.914world.... Jul 28 2008, 08:08 PM rudedude Ken,
What do you mean with the term "oilcan... Jul 28 2008, 09:13 PM scotty b
Ken,
What do you mean with the term "oilcan... Jul 29 2008, 06:50 PM thomasotten I have experience with a metal-shrinking hammer. ... Jul 28 2008, 09:22 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 07:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.