AAR results, need some verification if its good ty Options

[tod914]

Was doing some testing on my AAR to see if it's ok.

When unplugged and cold 13 ohms

AAR Warm 12-14 pounds of vaccume at idle from the cold start end hose
AAR Warm 22 pounds of vac @ 3500 rpm from the cold start end hose


AAR Warm on closed end; when you blow through it, seems closed.
Yet, when I do a vaccume test on it, it will go to 11.25 pounds in about
2 seconds and hold steady. By pulling off the line from the air cleaner end,
and blocking it, it seems to have no effect on idle when it's warm.

Do they all leak a little like this, or should there be zero vaccume comming
through ? If someone could verify with a good know AAR that would be great.

Trying to determine if I need a new one.


Thanks,

Tod