 Strut replacement question?, Strut replacement |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Robert_C |
 Dec 30 2008, 08:26 PM
Post
#1
|
|
Newbie  Group: Members Posts: 12 Joined: 30-December 08 From: Oklahoma Member No.: 9,885 Region Association: None  |
I'm 15 and recently bought a '72 914/4. My father and I were doing some work on it and I have run into a couple problems while trying to replace the struts.
First, I can't seem to get the old struts out of the spindles. My old struts were welded to the spindles but that doesn't seem to be the problem. I ground the welds down and I still couldn't separate them so I drilled the hole in the back of the spindel in case it was welded to the strut. Still no success. Any ideas? Second, is the spindle always welded to the strut? Thanks, Robert C. |
   |
 
|
Posts in this topic
Robert_C Strut replacement question? Dec 30 2008, 08:26 PM
Jeffs9146 Not sure what you are grinding but it sounds like ... Dec 30 2008, 08:29 PM r_towle The strut insert is held into the strut housing by... Dec 30 2008, 09:09 PM r_towle Here is a strut housing. This picture has no strut... Dec 30 2008, 09:14 PM ericread Robert C;
Welcome! At 15 it looks like you... Dec 30 2008, 09:19 PM
Richard Casto Robert,
I agree with Eric. Post some pictures. ... Dec 30 2008, 09:27 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 03:58 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.