 Valve problem, This time I think I'm screwed |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| fitzm1 |
 Apr 23 2009, 11:57 AM
Post
#1
|
|
Member  Group: Members Posts: 74 Joined: 21-April 08 From: Ballston lake,ny Member No.: 8,947 Region Association: None  |
Just finished all the work I had planned for this spring. Bump steer kit, CB fuel pump and cleaned (rebuilt ) the carb that has been giving me problems. Seemed to be running great. As I am going up a hill near home I hear a pop and the engine sounds like a sewing machine. First I thought I had lost a gear in the tranny but that seems fine. I checked the compression and all cylinders are 120. Car starts fine but sounds like one or more of the valves are real loud. Any explanation besides the one I fear (trashed motor).
Joe I think I broke your motor. Mike |
   |
 
|
Posts in this topic
fitzm1 Valve problem Apr 23 2009, 11:57 AM
underthetire Mine did the same thing yesterday. Ended up a head... Apr 23 2009, 12:34 PM Elliot Cannon Collapsed lifter??? :confused: Apr 23 2009, 12:49 PM Scott Schroeder What motor are you running? I had something very s... Apr 23 2009, 12:51 PM Cupomeat Ok, so if all the cylinders have even compression ... Apr 23 2009, 12:55 PM
fitzm1 Pulling the valve covers and checking the valves i... Apr 23 2009, 01:14 PM SGB plugs in tight?
if an exhaust stud pulled out, th... Apr 23 2009, 08:39 PM fitzm1 Plugs were in tight. I just checked the valve cle... Apr 24 2009, 02:22 PM kwales Coupla options.
Check the exhaust studs to see if... Apr 24 2009, 09:29 PM r_towle Take the valve covers off, jack up the passenger s... Apr 24 2009, 09:51 PM euro911 ... Either way. stop running the motor..just turn... Apr 24 2009, 10:45 PM fitzm1 I have the car up on stands. I have checked the v... Apr 25 2009, 09:16 AM Bartlett 914
Is it possible that a valve could drop but snap... Apr 26 2009, 10:13 AM fitzm1
Is it possible that a valve could drop but sna... Apr 26 2009, 12:20 PM Dave_Darling When one of my valve seats did that, it was deform... Apr 25 2009, 11:17 PM fitzm1
When one of my valve seats did that, it was defor... Apr 26 2009, 04:35 PM fitzm1 [quote name='Dave_Darling' post='1162241' date='Ap... Apr 26 2009, 04:40 PM euro911 I helped a guy remove a leaking exhaust to find th... Apr 26 2009, 06:40 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st May 2026 - 02:41 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.