 916 kit on 915 trans, Who dunnit? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| -JR- |
 Jul 10 2009, 05:18 PM
Post
#1
|
|
Life goes faster at 150MPH  Group: Members Posts: 276 Joined: 12-May 04 From: Victoria BC Canada Member No.: 2,055  |
I'm thinking about using a 915 behind my 3.6 teener. AutoAtlanta makes a 916 kit for ah.. Well a few bucks!
Just wondering if anyone else has bought their kit and can give me feedback on the setup? Also, any feedback on reversing the 915 would also be helpful. I understand the process is "fairly" simple. Especially when compared to a G50 installation. I believe you just flip the rear-end and machine the casing for it to fit reversed. I searched the garage forum for anything on 915 transmissions but got zero results. THANKS! -JR- |
   |
 
|
Posts in this topic
-JR- 916 kit on 915 trans Jul 10 2009, 05:18 PM
dr914@autoatlanta.com
I'm thinking about using a 915 behind my 3.6 ... Jul 10 2009, 05:30 PM
-JR-
don't do it!
--------------------
George... Jul 10 2009, 05:39 PM Wilhelm On AA's website it looks like the Velios kit w... Jul 10 2009, 05:44 PM GeorgeRud I might disagree with the good Doctor, there are a... Jul 10 2009, 05:47 PM -JR- Thanks George.
I've heard the 916 kits aren... Jul 10 2009, 06:01 PM dr914@autoatlanta.com As an owner of a 916 with the 915 box installed an... Jul 10 2009, 05:57 PM PRS914-6
As an owner of a 916 with the 915 box installed a... Jul 11 2009, 12:35 AM -JR- [quote name='PRS914-6' post='1190560' date='J... Jul 11 2009, 04:33 PM GeorgeRud Glad you chimed in. Do you feel any difference in... Jul 10 2009, 06:08 PM -JR-
There was a lot a talk about quality issues with ... Jul 10 2009, 06:12 PM carr914 The 901 is still the way to go unless you're a... Jul 10 2009, 06:12 PM -JR-
If I was looking for a different piece, I would l... Jul 10 2009, 06:14 PM GeorgeRud Once again, your good friend Vellios had a convers... Jul 10 2009, 06:19 PM PRS914-6 The 915 part of the Excellence articles is Part 8,... Jul 11 2009, 05:20 PM -JR- Found a Lambo kit car site that the guy used a 915... Jul 12 2009, 02:43 AM turboman808
The 915 part of the Excellence articles is Part 8... Jul 13 2009, 02:51 PM SirAndy I run a stock 901 behind my 3.6L. So far, so good.... Jul 12 2009, 06:00 PM PRS914-6
5th gear is OK for cruising on the freeway.
:sha... Jul 12 2009, 10:10 PM pcar916 I've run a 914 trans both with a 2.7(3 years) ... Jul 12 2009, 06:30 PM East coaster I'm very happy with my Wevo 915 behind my 3.6.... Jul 14 2009, 05:22 AM SirAndy
I thought about going with a beefed up 901, but f... Jul 14 2009, 11:04 AM PRS914-6
I thought about going with a beefed up 901, but ... Jul 14 2009, 11:43 AM Dr Evil Some really good info here. Thanks for sharing :) Jul 14 2009, 09:43 AM mikez Deckman runs a 915 in his.... Jul 14 2009, 10:05 AM Dr Evil Lightening the 1st and 2nd gears is done on the 90... Jul 14 2009, 10:38 AM mikez The 915 is not a cure all. Weak point is the inte... Jul 14 2009, 12:10 PM PRS914-6
The 915 is not a cure all. Weak point is the int... Jul 14 2009, 12:28 PM pcar916
The 915 is not a cure all. Weak point is the in... Jul 14 2009, 02:27 PM Steve
[quote name='PRS914-6' post='1191505' date='... Jul 14 2009, 08:33 PM Steve
There is one more cool thing about early 915... Jul 15 2009, 03:27 PM PRS914-6 the 7:31 box uses a taller 5th than the 8:31 but o... Jul 14 2009, 08:51 PM -JR- Paul are your 1st and 2nd gears custom machined by... Jul 15 2009, 01:19 AM PRS914-6 Running a 901 for awhile is actually a good move. ... Jul 15 2009, 08:09 AM PRS914-6 This is from memory....The early 915's I belie... Jul 15 2009, 04:07 PM Steve
This is from memory....The early 915's I beli... Jul 15 2009, 04:14 PM turboman808 I made a little price for a 915 build myself awhil... Jul 15 2009, 05:04 PM -JR- Paul you missed my question in my last post...
... Jul 15 2009, 11:09 PM PRS914-6 In my post above it says "The gears are made ... Jul 15 2009, 11:25 PM -JR-
In my post above it says "The gears are made... Jul 15 2009, 11:31 PM -JR- For those interested in more background on the 915... Jul 15 2009, 11:43 PM Steve Sorry for the hijack, but this is turning into a g... Jul 16 2009, 08:42 AM -JR-
Sorry for the hijack, but this is turning into a ... Jul 16 2009, 10:20 AM Dr Evil
Sorry for the hijack, but this is turning into a... Jul 16 2009, 08:58 PM Steve
For stock 5th gears the stock ZD in the 914 901 ... Jul 17 2009, 08:29 AM Dr Evil Installing a flipped H gear is the most economical... Jul 16 2009, 10:16 AM Steve
Installing a flipped H gear is the most economica... Jul 16 2009, 08:27 PM Dr Evil Steve, if you are unfamiliar with how the guts go ... Jul 16 2009, 08:57 PM Dr Evil You must call for pricing. Prices vary from ... Jul 17 2009, 11:47 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 07:07 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.