HELP: Nut and bolt specialist needed, Looking for something and can't seem to find it |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
HELP: Nut and bolt specialist needed, Looking for something and can't seem to find it |
koozy |
Nov 3 2009, 10:41 PM
Post
#1
|
Senior Member Group: Members Posts: 651 Joined: 21-July 07 Member No.: 7,931 Region Association: None |
I'm looking for a set of 10, M14x1.5x75mm socket head Cap Screws. 12.9 grade
Anyone out there a nut and bolt guy and know where I can get some? |
zonedoubt |
Nov 3 2009, 10:45 PM
Post
#2
|
Canadian Member Group: Members Posts: 668 Joined: 14-May 03 From: Vancouver, BC Member No.: 696 Region Association: Canada |
I'm looking for a set of 10, M14x1.5x75mm socket head Cap Screws. 12.9 grade Anyone out there a nut and bolt guy and know where I can get some? Try Fastenal |
underthetire |
Nov 3 2009, 10:55 PM
Post
#3
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
Ah, fine pitch metric. Call Mr. Metric in San Jose, somewhere like 4th st, close to the flea market.
http://www.mrmetric.com/ |
jimtab |
Nov 3 2009, 11:17 PM
Post
#4
|
Advanced Member Group: Members Posts: 3,477 Joined: 5-January 03 From: Pacifica, California Member No.: 91 Region Association: Northern California |
Mc Master Carr.....
|
strawman |
Nov 3 2009, 11:43 PM
Post
#5
|
Senior Member Group: Members Posts: 881 Joined: 25-January 08 From: Los Osos, CA Member No.: 8,624 Region Association: Central California |
Check Grainger; type in "M10x1.50.75"
I found this (if the link works!): http://www.grainger.com/Grainger/items/4XY85?Pid=search Price is $35.45 for 100. Geoff |
Cap'n Krusty |
Nov 4 2009, 12:04 AM
Post
#6
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Ah, fine pitch metric. Call Mr. Metric in San Jose, somewhere like 4th st, close to the flea market. http://www.mrmetric.com/ That pitch is standard, not fine. Local sources "might" be Caterpillar or John Deere dealers, although much of their hardware in the larger diameters is coarse. The Cap'n |
BMXerror |
Nov 4 2009, 12:56 AM
Post
#7
|
Senior Member Group: Members Posts: 1,705 Joined: 8-April 06 From: Hesperia Ca Member No.: 5,842 |
I'm looking for a set of 10, M14x1.5x75mm socket head Cap Screws. 12.9 grade Anyone out there a nut and bolt guy and know where I can get some? Ah... Bulldoser bolts! That's what I've got for my 5 point harnesses. I went to the local guy ('Nutty Bolts' in Hesperia) and he had to special order them, but had them in two days. You may be able to get them at the local Caterpillar dealer... You know what? I may have some left, but they're 12 point bolts, not socket head cap screws. I'll go check tomorrow. Don't know what your application is or how many you need. Mark D. |
strawman |
Nov 4 2009, 01:15 AM
Post
#8
|
Senior Member Group: Members Posts: 881 Joined: 25-January 08 From: Los Osos, CA Member No.: 8,624 Region Association: Central California |
Check Grainger; type in "M10x1.50.75" I found this (if the link works!): http://www.grainger.com/Grainger/items/4XY85?Pid=search Price is $35.45 for 100. Geoff Oops, I misread your post. Grainger has M14x2.0x75, $13.16 for 5. They don't list a M14x1.50x75mm. Good luck in your quest! |
underthetire |
Nov 4 2009, 01:31 AM
Post
#9
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
Ah, fine pitch metric. Call Mr. Metric in San Jose, somewhere like 4th st, close to the flea market. http://www.mrmetric.com/ That pitch is standard, not fine. Local sources "might" be Caterpillar or John Deere dealers, although much of their hardware in the larger diameters is coarse. The Cap'n You are wrong sir. Std pitch for a M14 is 2.0. 1.5 is a finer pitch fine thread chart http://www.efunda.com/DesignStandards/screws/screwm_fine.cfm Coarse thread chart http://www.efunda.com/DesignStandards/scre...rewm_coarse.cfm |
underthetire |
Nov 4 2009, 01:37 AM
Post
#10
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
And Mr. Metric will have them i'm sure. And he can drive from his house to Mr. Metric in about ten minutes. ( yes, i've been to your house) (IMG:style_emoticons/default/beer.gif)
|
Dave_Darling |
Nov 4 2009, 02:09 AM
Post
#11
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
As of a year or so back, Mr. Metric does not do walk-ins any more! (IMG:style_emoticons/default/sad.gif) I'm guessing they're trying to get away from onesie-twosie stuff like we need...
--DD |
koozy |
Nov 4 2009, 03:20 AM
Post
#12
|
Senior Member Group: Members Posts: 651 Joined: 21-July 07 Member No.: 7,931 Region Association: None |
Cool, thanks guys.
|
ArtechnikA |
Nov 4 2009, 06:13 AM
Post
#13
|
rich herzog Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None |
Maryland Metric is also a good source if you are in the Bay Area.
The part in question: 12,9 socket head capscrews |
zymurgist |
Nov 4 2009, 08:37 AM
Post
#14
|
"Ace" Mechanic Group: Members Posts: 7,411 Joined: 9-June 05 From: Hagerstown, MD Member No.: 4,238 Region Association: None |
I bought lifetime supplies of wave washers for CV jobs (914 and 911) from Metric Multistandard... also some funky Allen head fasteners for my 911, replacing the hex head bolts that the PO installed in a few places.
http://www.metricmcc.com/ |
tat2dphreak |
Nov 4 2009, 09:32 AM
Post
#15
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
I get all my stuff from:
http://baindustrial.com/fasteners.html they are just down the road, but if you call or email them they can get you anything you want. |
underthetire |
Nov 4 2009, 10:13 AM
Post
#16
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
Didn't know Mr. Metric stopped counter sales (IMG:style_emoticons/default/mad.gif)
An approved government fastener house for metric screws is Fabory USA Metric Fasteners Corp. 6095 Rickenbacker Rd. City of Commerce, CA 90040 323-726-9944 They only sell documented rated fasteners, so no cheap knock offs. Any yes, we have tested supposed grade fasteners that have not met the ANSI standards. Danforth (IMG:style_emoticons/default/barf.gif) Screw and supply in Tracy, ca or Seattle 209-830-2860 They are VERY slow to process orders. |
Cap'n Krusty |
Nov 4 2009, 11:54 AM
Post
#17
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Ah, fine pitch metric. Call Mr. Metric in San Jose, somewhere like 4th st, close to the flea market. http://www.mrmetric.com/ That pitch is standard, not fine. Local sources "might" be Caterpillar or John Deere dealers, although much of their hardware in the larger diameters is coarse. The Cap'n You are wrong sir. Std pitch for a M14 is 2.0. 1.5 is a finer pitch fine thread chart http://www.efunda.com/DesignStandards/screws/screwm_fine.cfm Coarse thread chart http://www.efunda.com/DesignStandards/scre...rewm_coarse.cfm So what does that make 1.75 and 1.25 (spark plug) threads? In the automotive world, M14x2.0 is as coarse as they come. In fact, the only use I can think of for a 2.0 is case savers of the most basic kind. The Cap'n |
underthetire |
Nov 4 2009, 12:40 PM
Post
#18
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
[quote name='Cap'n Krusty' date='Nov 4 2009, 09:54 AM' post='1234276']
That pitch is standard, not fine. Local sources "might" be Caterpillar or John Deere dealers, although much of their hardware in the larger diameters is coarse. The Cap'n [/quote] So what does that make 1.75 and 1.25 (spark plug) threads? In the automotive world, M14x2.0 is as coarse as they come. In fact, the only use I can think of for a 2.0 is case savers of the most basic kind. The Cap'n [/quote] Exactly, he wanted M14 x1.5, The M14 X2.0 is the coarse thread and the 1.5 is the harder to find fine thread. Only two pitches available with metric ANSI standards, not like our Fuched up SAE stuff where you can get 10/24, 10/32,10/etc etc. Sae used to be even worse, but they have tried to narrow it down to just two threads per inch per size. Thats why you might only find 1/4-20 and 1/4-28 etc. It's a little confusing for us, because we are so used to threads per inch is the us. Metric thread pitch is determined by: A metric screw thread is specified by how far, in millimeters it advances in one turn of the screw |
charliew |
Nov 4 2009, 10:01 PM
Post
#19
|
Advanced Member Group: Members Posts: 2,363 Joined: 31-July 07 From: Crawford, TX. Member No.: 7,958 |
I'm 65 and have been a mechanic on many things since I was 14. I have never heard metric threads called standard and fine or coarse like sae threads. There are four different metric threads that I am aware of and only a course and fine in sae for each diameter size of sae screw or bolt. Don't walk in a fastenal store and say course metric they will think you are a farmer.
|
underthetire |
Nov 4 2009, 11:00 PM
Post
#20
|
914 Guru Group: Members Posts: 5,062 Joined: 7-October 08 From: Brentwood Member No.: 9,623 Region Association: Northern California |
Depends on the fastenall, but usually they never have the fine pitch metric series anyway. The fine pitch metric is only used for very limited applications. And there are for sure more than 2 thread pitches per size for SAE. Being an ex machinist we saw them all. Metric only has two pitches per size though. Look at the chart for the metric stuff I posted before. And that chart does not even have the real small stuff listed.
This chart has a few more, shows the smaller (but not the smallest) and the different pitches. They don't show all the large thread sizes though. I do have a machinist handbook, i can look up what ever you need, but the handbook is almost 20 years old. They are very expensive to buy new so i make do. http://www.engineersedge.com/hardware/metr...read-sizes1.htm |
Lo-Fi Version | Time is now: 16th June 2024 - 06:51 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |