 Help me determine my compression ratio |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Cevan |
 Apr 14 2010, 11:45 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,079 Joined: 11-December 06 From: Western Massachusetts Member No.: 7,351  |
So I've started my engine build and have the engine mocked up to measure the deck height. My preliminary measurements are around .030. I've got to do some juggling around of components to get them more equal to each other. Here's what I've got:
head volume: 58.2 CCs bore: 96mm stroke 71mm Based on the cam I'm using here's what I get for different deck heights: .040 static C/R 8.84:1 dynamic C/R 7.76:1 .050 8.63:1 7.57:1 .055 8.53:1 7.48:1 .060 8.43:1 7.4:1 The engine is going in a 914 (obviously) that will be used for spirited street driving. I have 93 octane gas available here. The car will be driven between sealevel and 1000'. I'm using webers with SSI H/Es and a Bursch muffler. |
   |
 
|
Posts in this topic
Cevan Help me determine my compression ratio Apr 14 2010, 11:45 AM
Cevan So after refining and practicing my deck height me... Apr 15 2010, 08:52 AM Racer Chris Stock rods, 6000 rpm max?
I'd do it. Apr 15 2010, 09:53 AM ME733 .............034ths inch is way too CLOSE as a dec... Apr 16 2010, 08:37 AM
Cevan
.............034ths inch is way too CLOSE as a de... Apr 16 2010, 10:07 AM Dave_Darling There is a formula that takes valve opening times ... Apr 16 2010, 09:02 AM Cevan
There is a formula that takes valve opening times... Apr 16 2010, 10:15 AM ME733
There is a formula that takes valve opening time... Apr 16 2010, 03:31 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 03:03 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.