 '72 914 with 2056 ***SOLD*** |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tat2dphreak |
 May 15 2010, 08:30 AM
Post
#1
|
|
stoya, stoya, stoya  Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region   |
1972 914
Professionally rebuilt engine, with under 1000 miles on the rebuild (H&H Enterprises) -Weber 40 dual carburetor setup, 2056cc engine built on GA-block 2.0 with real 914 2.0 heads. lightened flywheel, 9.5:1 CR, crane ignition. rebuilt suspension: Koni (yellow) fronts, Bilstein rear shocks, front sway bar equipped. new ball joints, tie rods ends professionally stock 914 rebuilt brakes by PMBPerformance, Porterfield r4s pads new 19mm 911 Master Cylinder all new shift bushings, cables, etc. rebuilt pedal cluster by PMBPerformance (http://www.pmbperformance.com/catalog.html) tail-shift transmission has been replaced with the later side shift transmission(5 speed) all new transmission linkage bushings installed. euro tail lights(USA tail lights included as well) custom door panels(with fiberglass core, from 914ap.com), crack-free dash, center console, seats have no tears in the bolsters. H4 headlights. also included with the sale is a complete PROPER 5-lug conversion: 911 front end struts(M struts, 3" bolt pattern), with (NEW, Zimmerman) vented rotors, Brembo all-aluminum Brakes with Porterfield r4s pads. (for more information: http://www.pmbperformance.com/catalog/item...52/6862358.htm) including all new bearings for front and rear, rear 5-lug zinc-coated hubs all studs included and proper length for the boxster Rims included. all required spacers(22mm spacers for front), 8mm Spacer in rear) are also included to fit the meaty 16x7 and 16x6 rims(with good tires attached) onto the stock-bodied car. Many other parts are also included(spare targa top, etc.) all rust has been properly repaired. car is well maintained, and runs great! clear title. more pictures available upon request. more pictures: http://tiny.cc/dznow here's some more pictures, too... http://picasaweb.google.com/wafry1975/914P...feat=directlink http://picasaweb.google.com/wafry1975/Car?feat=directlink SOLD    |
   |
 
|
  |
Replies(1 - 19)
| tat2dphreak |
May 15 2010, 08:35 AM
Post
#2
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
   |
|
|
|
| Grelber |
May 15 2010, 07:28 PM
Post
#3
|
|
Insert favorite Don Rickles joke here. Group: Members Posts: 690 Joined: 30-May 06 From: McKinney, Texas Member No.: 6,107 Region Association: Southwest Region |
Wayne, why the heck are you selling?
|
|
|
|
| tat2dphreak |
May 15 2010, 10:10 PM
Post
#4
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
responded via PM....
but just for the record, I'm not selling due to anything with the car... just the squishy bit that sits in the driver seat. (IMG:style_emoticons/default/smile.gif) |
|
|
|
| LowGT |
May 16 2010, 10:39 PM
Post
#5
|
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
I saw this on craigslist and that it was your car. Good luck with the sale.
|
|
|
|
| hot_shoe914 |
May 17 2010, 02:40 AM
Post
#6
|
|
on ramp passer Group: Members Posts: 3,802 Joined: 20-November 07 From: Earle, Ar. Member No.: 8,354 Region Association: None |
(IMG:style_emoticons/default/WTF.gif) what are you going ti drive ti MUSR 11? I'm gonna tell Bill & Clay to kick your ass!
|
|
|
|
| tat2dphreak |
May 17 2010, 07:02 AM
Post
#7
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
I'm just trying to simplify my life, get my affairs in order and such. I'm sure later in life I'll have another one...
Dan, we should get together for a drive before I sell it... (IMG:style_emoticons/default/smile.gif) |
|
|
|
| carr914 |
May 17 2010, 08:46 AM
Post
#8
|
|
Racer from Birth Group: Members Posts: 118,670 Joined: 2-February 04 From: Tampa,FL Member No.: 1,623 Region Association: South East States  |
|
|
|
|
| dakotaewing |
May 17 2010, 07:19 PM
Post
#9
|
|
Senior Member Group: Members Posts: 1,160 Joined: 8-July 03 From: DeSoto, Tx Member No.: 897 Region Association: Southwest Region 
|
|
|
|
|
| tat2dphreak |
May 18 2010, 10:02 AM
Post
#10
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
if I am off on the price, lmk. 8500 is approx what I put into the car in the past year(including the 5 lug parts), so I started there..
|
|
|
|
| zymurgist |
May 18 2010, 11:21 AM
Post
#11
|
|
"Ace" Mechanic Group: Members Posts: 7,411 Joined: 9-June 05 From: Hagerstown, MD Member No.: 4,238 Region Association: None |
|
|
|
|
| EdwardBlume |
May 19 2010, 10:38 AM
Post
#12
|
|
914 Wizard Group: Members Posts: 12,338 Joined: 2-January 03 From: SLO Member No.: 81 Region Association: Central California
|
(IMG:style_emoticons/default/agree.gif) (IMG:style_emoticons/default/sad.gif)
That's a beautiful motor and the 2056 is the way to go... Good luck with the sale but I hope you change your mind.. |
|
|
|
| tat2dphreak |
May 19 2010, 11:51 AM
Post
#13
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
you guys are too kind. thank you.
I'm not selling because anyone's dying, or for financial reasons or divorce... I have stretched myself thin to do everything to the car I possibly could. but now, I look to the future and I see other things, besides the car that need my attention..., and I know it needs a paint job(paint is probably a 6/10) and seals. and after that, I still personally wouldn't get enough use out of it... I have enjoyed every minute, and I'm sure I'll have another one day. but for me right now, managing 3 cars is too much, esp when one never gets driven.. I'll probably find myself a fun daily driver once all the dust settles and my wife's car is paid for. this way someone actually gets to have a lot of fun with this car, which is what I wanted all along... (IMG:style_emoticons/default/smile.gif) I had fun doing, learning and driving it. now someone else can. |
|
|
|
| tat2dphreak |
May 20 2010, 08:02 AM
Post
#14
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
it was asked, so I'm updating the ad... I'll sell the 5 lug parts with boxster rims and tires(michelins with about 90% left on front, 70% on rear) separately for $1500 obo, leaving the car for 7000 obo without the 5 lug parts... you can still have the smooth, primed targa top, and I have a few more parts and tools I won't need so they can go with the car too
|
|
|
|
| tat2dphreak |
May 22 2010, 09:36 AM
Post
#15
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
|
|
|
|
| tat2dphreak |
May 28 2010, 08:50 AM
Post
#16
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
today is a good example of why I'm selling... this morning was 80, clear skies... telling me DRIVE...
but my back, friday traffic and my allergies said... take the car with A/C... 914 outvoted 3-2 (IMG:style_emoticons/default/icon_bump.gif) |
|
|
|
| tat2dphreak |
May 28 2010, 10:20 AM
Post
#17
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
BTW, I finished rebuilding the brembo brakes and mounting them on the 911 struts yesterday, the 5 lug conversion is now just a bolt on and go... and you'd still have the PMB rebuilt stock brakes if you ever wanted to fall back to 4 lugs.
|
|
|
|
| tat2dphreak |
Jun 4 2010, 12:45 PM
Post
#18
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
just a (IMG:style_emoticons/default/icon_bump.gif)
|
|
|
|
| tat2dphreak |
Jun 7 2010, 08:22 AM
Post
#19
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
ok guys, I'm going to have to make a move sooner than expected. some new developments have come up and this is not just a pre-emptive strike anymore. if you are interested send me an offer/PM, and I'll try not to let the emotions of what I've put into the car interfere with making a sale. (IMG:style_emoticons/default/smile.gif)
|
|
|
|
| r_towle |
Jun 13 2010, 05:35 PM
Post
#20
|
|
Custom Member Group: Members Posts: 24,574 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
QUOTE(tat2dphreak @ May 22 2010, 11:36 AM)  I am confused by the pictures. If I was interested in the 5 bolt setup, what is included? Can you post some pics of the whole setup please. Rich |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 10:39 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.