 help on door window alignment, window wont align |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| chrispy |
 Sep 18 2010, 12:58 PM
Post
#1
|
|
Newbie  Group: Members Posts: 48 Joined: 5-May 09 From: modesto, ca Member No.: 10,337 Region Association: None  |
1972 914 with 1973 doors. The passenger was easy but the driver side is killing me. The problem is getting the gap between the protection cap and the attachment strip gasket to "0". by adjusting thr shoulder bolt almost all the way out and loosening the wing window bolts, than pulling back and tightening, I am able to close the gap.However, when i do this and roll up the window, it closes nice and tight, but it pre loads the door something fierce.
this seems like a bad idea. Ive go about 10 hours into this "adjustment" including: making sure door is square, making sure car is square, subsituting almost every part (I have quite the spare part colection) all to no avail. Any ideas? thanks chrispy |
   |
 
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 21st May 2024 - 04:19 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.