 Boxster muffler install, finished.....well almost |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| toon1 |
 Feb 26 2011, 10:26 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,849 Joined: 29-October 05 From: tracy,ca Member No.: 5,022  |
This project(like all the others) has been on the "to do "list for awhile.
The mufller fits in the stock location pretty well even with the heat shield in place. If the heat shield was removed, it can go a little higher towards the trunk. I decided to go all stainless , which aint cheap, but will pay off in the long run. After all the hard work, I fired it up last night and I have an exhaust leak at the heads. It was 11pm so I shut the garage door and went to bed. I'm going to chase it down today. Here are soem pics. The first two show the hagers that need to be cut off. there are two on top that are threaded studs and to hangers on the back. Attached image(s)   
|
   |
 
|
Posts in this topic
toon1 Boxster muffler install Feb 26 2011, 10:26 AM
toon1 few more Feb 26 2011, 10:28 AM toon1 I will take a few more pics of the how the final i... Feb 26 2011, 10:29 AM PanelBilly I'm just wondering why you chose to put this m... Feb 26 2011, 10:44 AM ConeDodger Cool project... As I recall from my Boxster that m... Feb 26 2011, 10:57 AM toon1
I'm just wondering why you chose to put this ... Feb 26 2011, 11:03 AM ConeDodger So it's a wash. Very cool :) Feb 26 2011, 11:52 AM PanelBilly Just wondered. It looks cool Feb 26 2011, 12:52 PM gothspeed Looks good :)! I too prefer a quieter exhaust ... Feb 26 2011, 01:36 PM Cap'n Krusty Excuse me? How is a 40 pound Boxster muffler ... Feb 26 2011, 02:09 PM
Dave_Darling
Excuse me? How is a 40 pound Boxster muffler ... Feb 26 2011, 07:35 PM majkos
Excuse me? How is a 40 pound Boxster muffler ... Feb 26 2011, 08:32 PM raw1298 I will be doing the same with my car. Can't wa... Feb 26 2011, 04:16 PM DanT have to agree with the Cap'n.
Boxster muff... Feb 26 2011, 04:36 PM zambezi If you guys don't mind looking at another take... Feb 26 2011, 11:15 PM zambezi Another view
Feb 26 2011, 11:16 PM zambezi View of the collector
Feb 26 2011, 11:17 PM zambezi View of the mounts
Feb 26 2011, 11:18 PM zambezi Test fit into car. I removed the heat shield as I... Feb 26 2011, 11:21 PM zambezi I like the look of a low rear valance to give the ... Feb 26 2011, 11:24 PM zambezi and finally a side view of the valance. The valan... Feb 26 2011, 11:27 PM raw1298 Thanks for the pics. Both of these installs look g... Feb 27 2011, 09:41 AM majkos I want to hear it!
I bet it's gonna sound ... Feb 27 2011, 11:57 AM McMark Cool! I've got a Boxster muffler sitting ... Feb 27 2011, 12:10 PM toon1 Hey zambezi, I like the way you did yours. I espec... Feb 27 2011, 12:33 PM Jake Raby We plan on making a production unit sometime soon ... Feb 27 2011, 12:58 PM Al Meredith On the Boxster muffler subject. I have a 2.5L 99 B... Feb 27 2011, 01:54 PM zambezi I believe the s muffler will have a dual outlet as... Feb 27 2011, 01:59 PM Woody Muffler is the same, just a different tip. Feb 27 2011, 02:29 PM Phoenix-MN Here's a video clip of my Boxster muffler (on ... Feb 27 2011, 02:39 PM gothspeed
Here's a video clip of my Boxster muffler (on... Feb 27 2011, 04:34 PM Jake Raby Al, there are internal differences in the S muffle... Feb 27 2011, 05:53 PM toon1 I got the exhaust leak fixed on took the car for a... Feb 27 2011, 06:40 PM NS914
This project(like all the others) has been on the... Mar 28 2024, 10:06 AM krazykonrad Apart from the sound, is there any benefit to goin... Mar 28 2024, 02:14 PM SirAndy
Apart from the sound, is there any benefit to goi... Mar 28 2024, 04:51 PM raw1298 Sounds awesome. Mar 29 2024, 06:16 PM r_towle @trojanman might want to give you his once per de... Mar 29 2024, 06:36 PM targa72e From what I have researched when I was looking at ... Mar 31 2024, 10:56 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th May 2024 - 05:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.