 front geometry help, how much camber adj? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mskala |
 Apr 17 2003, 07:58 AM
Post
#1
|
|
R  Group: Members Posts: 1,925 Joined: 2-January 03 From: Massachusetts Member No.: 79 Region Association: None 
 |
Okay suspension gurus,
What's the deal with the front camber? How much adjustment is there supposed to be? People aim for -1.5 degrees so I was kinda assuming that the range would be about that much. But of course when I borrowed a bubble gauge, I'm not able to change things by more than 0.75. When I do the rough math, with the strut somewhere around 25" long, the adjustment slot about 0.77", and the bolt diameter of 0.39", that leaves arcsin((0.77-0.39)/25)=0.87 degrees. What am I missing? Want to get real camber in front, but stay in stock class. Thanks, Mark S.(IMG:http://members.rennlist.com/marks/build.gif) '70 914-6 |
   |
 
|
Posts in this topic
mskala front geometry help Apr 17 2003, 07:58 AM
drew365 The guru's are still sleeping so I'll pass... Apr 17 2003, 09:16 AM Brad Roberts You have to cut the tub. If you dont buy the upper... Apr 17 2003, 09:27 AM crash914 B) Mark, let me know what you find out...I might d... Apr 17 2003, 10:00 AM mskala ... Apr 17 2003, 12:22 PM mskala Thanks everyone. Just needed to be sure I wasn... Apr 17 2003, 12:25 PM
J P Stein These will give a bit over 1 deg more negative cam... Apr 17 2003, 01:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 04:04 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.