 2.0l Heads with 48/38- too big for a 2258? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Aug 15 2011, 02:41 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
My buddy has a set of 2.0l heads that have 48mm intakes and 38mm exhaust valves. I am using weber 44idf's, My cam has .500" lift.
I intend on using my car for street and auto x. Is this a reasonable set of heads for my setup or should I go smaller? |
   |
 
|
Posts in this topic
tornik550 2.0l Heads with 48/38- too big for a 2258? Aug 15 2011, 02:41 PM
yeahmag Those are HUGE. I'd post over in Jake's fo... Aug 15 2011, 03:23 PM Jake Raby That big intake valve just gets in the way of true... Aug 15 2011, 06:02 PM
tornik550
That big intake valve just gets in the way of tru... Aug 15 2011, 06:14 PM Jake Raby Bigger isn't better. Aug 15 2011, 06:19 PM r_towle only fun at WOT.
The rest of the time it will just... Aug 15 2011, 07:11 PM Jake Raby And it won't even make power at WOT.
Bite the... Aug 15 2011, 07:41 PM kg6dxn You could buy them and make a turbo T4... Velocity... Aug 15 2011, 11:14 PM HAM Inc If the heads have been welded so the intake ports ... Aug 16 2011, 07:04 AM r_towle
If the heads have been welded so the intake ports... Aug 16 2011, 11:21 AM Jake Raby Just like Len said.. The port can't support th... Aug 16 2011, 11:08 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 06:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.