 Wheel bearings, recommendations... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| flipb |
 Oct 15 2011, 02:01 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,816 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region 
 |
I've been noticing a slight grinding/vibration sensation through the front end whenever turning much off-center.
Today, I took my 914 to an open lift day at a local Porsche shop. I was just hoping to see if there was vertical play in the wheels, but my mechanic was kind enough to remove the front wheels and pull the outer bearing. It was in rough shape and he recommended that I should soon replace "all the bearings". (They are original on a car with at least 130K miles.) I've gathered there's inner & outer bearings for the front wheels, presume there's something roughly equivalent in the rear... So my questions are: 1. Can someone help me understand what "all the bearings" would include? 2. Pelican seems to have reasonably priced OEM-brand, is that what I want? 3. Anything else I should do "while I'm in there"? (No, not interested in 5-lug hubs.) |
   |
 
|
Posts in this topic
flipb Wheel bearings Oct 15 2011, 02:01 PM
flash914 Yes you most likely should change the rear. NO th... Oct 15 2011, 03:29 PM matthepcat Buy your bearings from Eric Shea here on the board... Oct 15 2011, 11:36 PM
rjames There are plenty of threads here showing how to do... Oct 16 2011, 02:28 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 30th June 2025 - 10:21 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.