 Creeping clutch adjustment, nuts! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ripper911 |
 Oct 21 2011, 03:25 PM
Post
#1
|
|
corde pulsum tangite  Group: Members Posts: 2,920 Joined: 25-April 10 From: Powder Springs, GA Member No.: 11,654 Region Association: South East States  |
For the past week or so I've been having to adjust my clutch every couple of days, the screws are backing off and have to be tightened up again.
The lock nut must not be holding it's spot like it should be. Should I buy another lock nut, I guess just any other one would work? Suggestions! (IMG:http://www.914world.com/bbs2/uploads_offsite/209.85.62.26-11654-1319232349.1.gif) |
   |
 
|
Posts in this topic
ripper911 Creeping clutch adjustment Oct 21 2011, 03:25 PM
BajaXJ92 Hell I've got the same issue on my /8 car. Cu... Oct 21 2011, 03:36 PM vsg914 What kind of locknut do you have? Nylok or two jam... Oct 21 2011, 03:40 PM Vacca Rabite The clutch tube could be comming out, clutch cable... Oct 21 2011, 03:48 PM Drums66 .......Yeah!...suggestion's above(they do ... Oct 21 2011, 04:43 PM jsayre914 I double nutted mine
:miles:
no pun intende... Oct 21 2011, 05:02 PM
jcd914
I double nutted mine
:miles:
no pun intend... Oct 21 2011, 05:07 PM Drums66
I double nutted mine
:miles:
no pun inten... Oct 22 2011, 11:48 AM jim_hoyland When I last required several cable adjustments, it... Oct 21 2011, 05:14 PM SUNAB914 Check the tube as other have said, althought i... Oct 21 2011, 05:20 PM BajaXJ92 My car has the 9in clutch kit with the Kevlar disc... Oct 21 2011, 05:41 PM scotty b The curious thing with Adams car is it isn't a... Oct 21 2011, 05:47 PM Dr Evil That tube was not made to handle the force applied... Oct 21 2011, 06:07 PM BajaXJ92
or a different clutch.
Www.notgonnahappen.com/... Oct 21 2011, 06:15 PM Dr Evil I can make up a pulley system to save some strain.... Oct 21 2011, 06:35 PM BajaXJ92
I can make up a pulley system to save some strain... Oct 21 2011, 06:55 PM ripper911 I'm pretty sure my nuts are actually moving, I... Oct 21 2011, 06:54 PM scotty b
I'm pretty sure my nuts are actually moving, ... Oct 21 2011, 07:18 PM BajaXJ92
[quote name='ripper911' post='1558862' date='Oct ... Oct 21 2011, 07:43 PM kg6dxn I use a short piece of fuel hose with a clamp to k... Oct 22 2011, 11:54 AM ripper911
I use a short piece of fuel hose with a clamp to ... Oct 22 2011, 04:14 PM Dave_Darling
I use a short piece of fuel hose with a clamp to ... Oct 22 2011, 08:50 PM Vacca Rabite Just double nut it, like it is supposed to be.
Za... Oct 22 2011, 05:28 PM rick 918-S Double nutting the cable should be all it takes. W... Oct 22 2011, 10:26 PM 9146986 It could also be the roll pin in the pedal cluster... Oct 23 2011, 06:23 AM ripper911 It is currently double nutted, I'm thinking th... Oct 23 2011, 08:08 AM rick 918-S After you complete adjustment and tighten the oute... Oct 23 2011, 09:06 AM ripper911 So, after reaching the proper adjustment, I should... Oct 23 2011, 09:12 AM brant
So, after reaching the proper adjustment, I shoul... Oct 23 2011, 09:16 AM ripper911 This is the first time this has given me problems,... Oct 23 2011, 09:18 AM vsg914 Like the others said, they gotta be tight. Thats w... Oct 23 2011, 03:55 PM ripper911 Yep, there's a 11mm wrench ground down at my d... Oct 24 2011, 10:12 AM Bartlett 914
Yep, there's a 11mm wrench ground down at my ... Oct 24 2011, 12:29 PM vsg914 Good question. If they are, they won't tighten... Oct 24 2011, 12:38 PM maf914 Carrying a spare cable never hurts, but you should... Oct 24 2011, 01:39 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 12:21 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.