 Front Rotor/Bearing Replacement |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| seanery |
 Sep 1 2004, 10:29 AM
Post
#1
|
|
waiting to rebuild whitey!  Group: Retired Admin Posts: 15,857 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None  |
Quick questions...how much grease? What kind? What do I torqe bearing retainer to?
thanks! getting a bit dirty! woohoo! (am I motivated? I'm trying (IMG:style_emoticons/default/smile.gif) ) |
   |
 
|
Posts in this topic
seanery Front Rotor/Bearing Replacement Sep 1 2004, 10:29 AM
seanery no good advice?
I'm surprised! Don't ... Sep 1 2004, 11:06 AM jim912928 Sean...just did this about 4 weeks ago. I'm a... Sep 1 2004, 11:08 AM lapuwali I use wheel bearing grease (happen to use Castrol)... Sep 1 2004, 11:28 AM SpecialK Yep, what James said.
I did mine about 3 weeks ag... Sep 1 2004, 12:26 PM seanery so the only grease in the whole ensemble should be... Sep 1 2004, 12:59 PM seanery Well, I think i have a problem.
I've got the ... Sep 1 2004, 02:08 PM lapuwali There's a seat for the races in the hub, and t... Sep 1 2004, 02:21 PM Eric_Shea Doesn't sound like the race is seated properly... Sep 1 2004, 02:23 PM seanery when the race is in is there 1 cm clearance betwee... Sep 1 2004, 02:26 PM tbil Yep, need to tap the race further into the hub. A... Sep 1 2004, 02:28 PM seanery hell, I knew I shoulda put the fronts in the freez... Sep 1 2004, 02:28 PM Eric_Shea One other thingy... it could be me but; I don... Sep 1 2004, 02:30 PM Eric_Shea QUOTE
lapuwali QUOTE
SpecialK No grease on the the races, and clean the mating h... Sep 1 2004, 04:30 PM seanery well damn. what a pain.
races are freezing, so I ... Sep 1 2004, 04:40 PM Eric_Shea QUOTE
seanery Yeah, that confused me too. Mr. Haynes can be vagu... Sep 1 2004, 04:47 PM Engman Which 914 of yours are you redoing?
Yep I got som... Sep 1 2004, 04:54 PM lapuwali Eric, I agree that it's good practice IF YOU H... Sep 1 2004, 05:05 PM
seanery Mr. Haynes agreed with Eric. But I agree with the ... Sep 1 2004, 05:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st July 2025 - 10:35 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.