 75 2.0 head, Picture of the air injection port |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| glens67 |
 Feb 24 2012, 05:02 PM
Post
#1
|
|
Newbie  Group: Members Posts: 35 Joined: 13-March 10 From: Middleton, ID Member No.: 11,462 Region Association: Rocky Mountains  |
The Smog port? I'm pluging the injection port. Does it line up with the valve?
I could not find 10 X 1.0mm 45 mm long socket head cap screws, so I cut the heads off of some regular cap screws and RTV sealed them. the 17mm head interfered with the intake manifold. Should of just ground the cap round and cut a screw slot. Thanks |
   |
 
|
Posts in this topic
glens67 75 2.0 head Feb 24 2012, 05:02 PM
Vacca Rabite RTV? I doubt that will hold. There is fire under ... Feb 24 2012, 05:34 PM glens67 Thanks Zack.
Did not like the way I installed the ... Feb 24 2012, 05:51 PM 76-914 Why soooooooo long 45mm??? Mine looked like regula... Feb 24 2012, 09:56 PM euro911 The ones on my old '75 heads were Allen set-sc... Feb 24 2012, 11:01 PM glens67 Are there pictures of the exhaust port that show t... Feb 25 2012, 01:44 AM 76-914 1-Are your heads still on the car?
2-Do you still ... Feb 25 2012, 08:21 AM Tom I try to make mods that are easily reversible, so ... Feb 25 2012, 08:32 AM
glens67
I try to make mods that are easily reversible, so... Feb 25 2012, 11:41 AM SLITS You won't hit a valve. If you have the old in... Feb 25 2012, 08:33 AM jimkelly oh - i see. Feb 25 2012, 08:36 AM euro911 I had the Allen 'plug' at cyl #1 come out ... Feb 25 2012, 12:10 PM glens67 Ok too much thinking. #1 cylinder port threads wer... Feb 28 2012, 10:53 AM ConeDodger RTV will not hold.
Try this. Cut the injection l... Feb 29 2012, 11:47 AM Mark Henry 10mm valve adjuster screws will work.
I just left... Feb 29 2012, 12:29 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 04:45 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.