 Brakes, Problem when bleeding |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| FlatSix |
  Mar 10 2012, 09:07 AM
Post
#1
|
|
English Member  Group: Members Posts: 191 Joined: 14-January 03 From: Poole, England Member No.: 144  |
I'm gradually getting the car back on the road and have recently rebuilt a rear caliper. Whilst bleeding this caliper, progress was being made however the pedal now goes to the floor each time and a slight gurgling sound can be heard when I open the bleed screw but hardly any fluid comes out. This has been going on for quite a while with no change. The front brakes do work but neither of the back brakes. Should I continue or do I need to do something else?
|
   |
 
|
Posts in this topic
FlatSix Brakes Mar 10 2012, 09:07 AM
6freak lots of air in the system...and not enough fluid .... Mar 10 2012, 09:53 AM FlatSix The pedal has gone to the floor, lots of times now... Mar 10 2012, 10:18 AM
6freak
The pedal has gone to the floor, lots of times no... Mar 10 2012, 02:39 PM 76-914 Check this site for McMarks long tube method. Mar 10 2012, 11:09 AM ppetion Clogged master cyl on the rear ports due to ... Mar 10 2012, 04:31 PM 6freak If thats the case ya got some work to do ...Mr she... Mar 10 2012, 08:01 PM 7391420 If you have been bleeding the system properly and ... Mar 10 2012, 11:18 PM Prospectfarms
No pressure at pedal = blown MC seal, per: PPeti... Mar 11 2012, 09:04 AM McMark Yeah, your MC is probably dead. I usually just re... Mar 11 2012, 09:50 AM FlatSix Thanks for all the replies.
Thats just great, I n... Mar 11 2012, 11:04 AM ppetion You may search for instructions for bench bleed fi... Mar 11 2012, 11:16 AM FlatSix Am I correct in thinking becase it's new and n... Mar 11 2012, 11:21 AM stugray I have never heard of the "dont press the ped... Mar 11 2012, 02:21 PM Prospectfarms Old MC have a wear line, or crud line, whichever, ... Mar 11 2012, 09:50 PM McMark :agree: with Stuart. It's mostly a problem wi... Mar 11 2012, 11:22 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 08:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.