 Rear Drive Shafts For 914/6 conversion, Are 911 shafts stronger? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ber914 |
 Sep 25 2004, 06:25 PM
Post
#1
|
|
Newbie  Group: Members Posts: 43 Joined: 8-April 04 From: Sydney, Australia Member No.: 1,908  |
I am currently sorting out a 914/6 conversion which I bought and eventually hope to run about 250 RWHP in. One of the last items I need to tackle is the rear 5 lug conversion and am looking to put a set of correctly drilled 914 rear hubs on. However I have been told that the 914 driveshafts will be problematic with 250 HP. Would I be better off using an early (69 - 73) 911 setup of driveshafts, stub axles and hubs with an adaptor to mate the driveshafts to the 914 box? Would this be a stronger setup and is it possible to mate up with an adaptor?
Robert |
   |
 
|
Posts in this topic
ber914 Rear Drive Shafts For 914/6 conversion Sep 25 2004, 06:25 PM
skline The shafts are not really any stronger, just short... Sep 25 2004, 06:28 PM ber914 Thanks Scott
Obviously not looking to spend money... Sep 25 2004, 06:37 PM Qarl You want the '71 to '72 911 Drive shafts..... Sep 25 2004, 06:45 PM ber914 Thanks Karl - are they stronger than the original ... Sep 25 2004, 06:49 PM Qarl That's what my Race shop guy wants me to use..... Sep 25 2004, 07:10 PM Gary Qarl,
Cool tip on the sportomatic tranny flanges.... Sep 28 2004, 06:39 AM
Qarl early 70's (71-74???)
later ones are fine s... Sep 28 2004, 07:43 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th May 2024 - 05:26 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.