Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> No spark... Well. Some spark.
broomhandle
post Oct 1 2012, 10:38 PM
Post #1


Member
**

Group: Members
Posts: 290
Joined: 26-June 09
From: Half Moon Bay, CA
Member No.: 10,512
Region Association: Northern California



I'm going nuts. I have spark to my points. They open and close. But I have no spark to my plugs.

I have a 1.8 with a 009 dist.

Any thoughts? It turns over but nothing.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
broomhandle   No spark... Well. Some spark.   Oct 1 2012, 10:38 PM
messix   I'm going nuts. I have spark to my points. Th...   Oct 1 2012, 10:41 PM
broomhandle   Yeah, coil is almost new.   Oct 2 2012, 12:26 AM
ArtechnikA   Yeah, coil is almost new. If you have spark at T...   Oct 2 2012, 03:56 AM
broomhandle   Yeah, coil is almost new. If you have spark at ...   Oct 2 2012, 10:25 AM
timothy_nd28   The points are either burnt, or your condenser is ...   Oct 2 2012, 12:41 AM
bandjoey   Several threads on testing coils. I think if you p...   Oct 2 2012, 11:12 AM
bandjoey   Here u go on coil Hopefully that will resolve your...   Oct 2 2012, 11:31 AM
broomhandle   cool, ill check that. but i have starting problem....   Oct 2 2012, 01:11 PM
Katmanken   Check to see if you are getting 12v to the coil wh...   Oct 2 2012, 04:44 PM
bandjoey   There are not that many parts. Plugs. Wires. P...   Oct 2 2012, 04:51 PM
underthetire   Just gotta ask, the points are hooked up the the -...   Oct 2 2012, 05:32 PM
The Cabinetmaker   Ok, you have spark from the coil wire, and the poi...   Oct 2 2012, 06:01 PM
broomhandle   its a bosch cap/rotor, not that old. i was thinkin...   Oct 3 2012, 09:54 AM
euro911   Is your point gap set at .016" (or a dwell re...   Oct 3 2012, 10:59 AM
broomhandle   Is your point gap set at .016" (or a dwell r...   Oct 3 2012, 11:09 AM
rhodyguy   a 1.8 and an 009? carbs? k   Oct 3 2012, 02:29 PM
broomhandle   a 1.8 and an 009? carbs? k Yes. and carb.   Oct 3 2012, 03:24 PM
Dave_Darling   Let's just re-state this. You have power to t...   Oct 3 2012, 04:53 PM
broomhandle   it was the bloody green wire...... I told you i ha...   Oct 4 2012, 09:48 AM
Dave_Darling   Isolate and test, be methodical. :) It does tend...   Oct 4 2012, 06:34 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 19th May 2024 - 06:44 PM