 Trans Temps, What are people seeing? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Matt Romanowski |
 Apr 15 2013, 06:03 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 878 Joined: 4-January 04 From: Manchester, NH Member No.: 1,507  |
This weekend after a 40 minute stint on the track, we saw our transmission temps getting to 247F. That is on a day were it was about 45F ambient and we had the pump and cooler running.
Doing some research, the answers I've heard on safe temperatures are all over. The oil is good to 300F according to the manufacturer and some folks say they run there, but that seems really hot. Most folks say they like to be around 225F. We just rebuilt the transmission and set the R+P to the factory backlash setting of .007", but we're going to open the transmission up and loosen things up a bit.  |
   |
 
|
Posts in this topic
Matt Romanowski Trans Temps Apr 15 2013, 06:03 PM
brant where do you have your gauge sender mounted?
I wou... Apr 15 2013, 07:16 PM Matt Romanowski Ours is mounted near the drain. This is the third ... Apr 15 2013, 07:49 PM brant remind me...
how much motor/torque are you running... Apr 15 2013, 07:51 PM
Matt Romanowski
remind me...
how much motor/torque are you runnin... Apr 15 2013, 08:27 PM crresind The problem is not the 'tight' backlash, i... Apr 16 2013, 07:41 AM Matt Romanowski
The problem is not the 'tight' backlash, ... Apr 16 2013, 08:24 AM brant I can believe it
and you have lots of torque compa... Apr 15 2013, 08:32 PM brant What trans oil are you running ?
my race trans b... Apr 16 2013, 08:34 AM Matt Romanowski I've used Amsoil and Mobil 1. The Amsoil seems... Apr 16 2013, 08:51 AM john rogers Some questions and some observations. First off, w... Apr 18 2013, 07:08 PM Matt Romanowski
Some questions and some observations. First off, ... Apr 18 2013, 08:25 PM yeahmag As far as I know that shifter is still available:
... Apr 18 2013, 08:26 PM john rogers Here is a picture of how we did mine and the cooli... Apr 20 2013, 05:48 PM Matt Romanowski I added a fan to the cooler and the high we saw no... May 10 2013, 09:06 PM brant
I added a fan to the cooler and the high we saw n... May 11 2013, 07:17 AM Matt Romanowski I did this up real quick. The cooler is 5x9 so a r... May 11 2013, 10:39 AM brant so its one of the inline bilge type fans then... ... May 11 2013, 12:54 PM Matt Romanowski I got mine from Roush, but you can get them all ov... May 11 2013, 07:01 PM r_towle I am curious to know the tolerance spec of what I ... May 13 2013, 08:25 AM 396 I'm no trans expert but majority of the soluti... May 13 2013, 09:20 AM brant just another data point:
I took my cooler set up ... May 22 2013, 12:55 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.