 Dellorto problem. disaster averted, garage reeks of fuel |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rhodyguy |
 Jun 9 2013, 04:25 PM
Post
#1
|
|
Chimp Sanctuary NW. Check it out.  Group: Members Posts: 22,080 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch  |
all set, ready for fire up, energize the pump (didn't spin the engine) and the pump doesn't quiet down (cb carb pump) as the bowls fill as it did with the webers. i look over and there's a thin fountain the coming up and fuel welling thru the square in between the main stacks on the dr side carb. puddles on top of both of the throttle plates.
the pass side has the duel banjo fitting. fuel supply line connects to one fitting and the other fitting is supposed to supply the dr side eliminating the need for a 'T". does it make any dif which fitting gets the pump supply and which one connects to the dr side carb? top fitting as opposed to bottom. the dellorto book mentions the dual banjo but doesn't specify if it makes a dif where the lines are/how hooked up. i had just changed out the oil so i know the 3 1/2 quarts of BP will get dumped. any ideas? k |
   |
 
|
Posts in this topic
rhodyguy Dellorto problem. disaster averted Jun 9 2013, 04:25 PM
FourBlades This happened to me twice when my float valves wou... Jun 9 2013, 04:38 PM rhodyguy i was lucky not to have tried to start it. this wa... Jun 9 2013, 04:50 PM DBCooper does it make any dif which fitting gets the pump s... Jun 9 2013, 05:19 PM nathansnathan I had this same thing happening after about a year... Jun 9 2013, 05:22 PM rhodyguy took the top off. big goober of debris was lying o... Jun 9 2013, 05:41 PM rhodyguy while i'm under there...turn the key to the fi... Jun 9 2013, 05:50 PM rhodyguy plugs out and it turns over nicely. briefly, all i... Jun 9 2013, 06:04 PM rhodyguy a portion of the crap that was in the bowl. was ab... Jun 9 2013, 06:11 PM sixnotfour Carb Stone, It wont pass though.. Jun 9 2013, 06:29 PM rhodyguy seriously? if the coil had been hooked up and the ... Jun 9 2013, 07:04 PM ThePaintedMan If it was completely hydrolocked, it wouldn't ... Jun 9 2013, 07:55 PM nathansnathan Hydrolock will definitely happen, cylinder is fill... Jun 9 2013, 08:09 PM rhodyguy nathan, thanks for the tip about dellorto uk. othe... Jun 9 2013, 08:49 PM DBCooper You didn't mention the needle valves. You say... Jun 10 2013, 06:14 AM rick 918-S Kev,
You may know this already but when viewing ... Jun 10 2013, 07:54 AM rhodyguy thanks rick. i checked the float/valve action when... Jun 10 2013, 08:16 AM
FourBlades The thing which caused my floats to hang up was th... Jun 10 2013, 09:29 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 07:12 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.