 Door check strap clicks, any solutions? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914ltd |
 Aug 11 2013, 08:25 PM
Post
#1
|
|
Member  Group: Members Posts: 239 Joined: 18-April 03 From: Peoria, IL Member No.: 581 Region Association: None 
 |
A real common 914 problem: The tabs mounted on the door post have worn and allow the new check strap to click as it reaches the next detent. A larger pin would eliminate the problem but enlarging the holes on the tabs is a problem with clearance issues. Any bright ideas? Thanks, Brad
Attached image(s) 
|
   |
 
|
Posts in this topic
914ltd Door check strap clicks, any solutions? Aug 11 2013, 08:25 PM
Dave_Darling You need a buddy with a welder and a six-pack of b... Aug 11 2013, 10:05 PM siverson > The tabs mounted on the door post have worn
... Aug 12 2013, 12:09 AM McMark
Yup. Aug 12 2013, 12:41 AM Bartlett 914 I had the same problem with my green car. It wasn... Aug 12 2013, 10:48 AM r_towle right angle die grinder with a milling bit attache... Aug 12 2013, 12:10 PM 914ltd I intended to get the 1/4 ream (thanks, Mark) and ... Aug 18 2013, 05:42 PM
r_towle
I intended to get the 1/4 ream (thanks, Mark) and... Aug 19 2013, 11:12 AM Bartlett 914
I intended to get the 1/4 ream (thanks, Mark) an... Aug 19 2013, 11:50 AM Racer Chris
I just used a chucking reamer I had in my shop.
... Nov 21 2013, 04:14 PM Bartlett 914
[quote name='Bartlett 914' post='1911675' date='A... Nov 21 2013, 06:59 PM partwerks Brad,
Would clamping a piece of brass over the h... Aug 18 2013, 09:44 PM 914ltd
Brad,
Would clamping a piece of brass over the ... Aug 19 2013, 06:22 AM kg6dxn I removed the one on the drivers side. Fuch it... ... Aug 18 2013, 11:53 PM Firstcar I used a short bolt with a nylon nut in place of t... Aug 19 2013, 07:02 AM Firstcar
I used a short bolt with a nylon nut in place of ... Aug 19 2013, 07:04 AM cary I put in a brass bushing from the little drawers a... Aug 19 2013, 09:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th May 2024 - 04:14 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.