 Throttle sticking - Fixed thanks to the World, Could this be the distributor? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| wndsnd |
 Nov 16 2013, 04:19 PM
Post
#1
|
|
You wanted a horse, but got a goat. Nobody wants a goat....  Group: Members Posts: 2,861 Joined: 12-February 12 From: North Shore, MA Member No.: 14,124 Region Association: North East States   |
I checked the throttle cable and I can see it is not wrapped.
All the linkage seems fine, and I have the idle screws all the way out. I am even running an extra spring on the throttle bar to ensure that I get full return. Nothing seems to be binding. I am running an old original distributor with the injection point set removed, and the vacum advance disabled. Am I wasting time chasing throttle cable functions or is it just the stinking distributor? |
   |
 
|
Posts in this topic
wndsnd Throttle sticking - Fixed thanks to the World Nov 16 2013, 04:19 PM
Mike Bellis Is your throttle cable too tight? On some cars, li... Nov 16 2013, 05:58 PM wndsnd Thanks Mike, but I backed it off a bit and it sti... Nov 16 2013, 06:12 PM r_towle Explain, with pics, how you disabled the vacuum ad... Nov 16 2013, 06:16 PM wndsnd Without pics,
I took it off the board and pulled ... Nov 16 2013, 06:27 PM wndsnd Like this
Do you need this? :blink: :idea:
... Nov 16 2013, 06:43 PM
JamesM
Like this
Do you need this? :blink: :idea:
... Nov 16 2013, 10:16 PM wndsnd
Like this
Do you need this? :blink: :idea: ... Nov 16 2013, 10:25 PM Mike Bellis If the plate is moving inside the dizzy, it could ... Nov 16 2013, 06:48 PM r_towle Advance plates can stick
Improperly mounted points... Nov 16 2013, 06:51 PM wndsnd I think I will go back to trying to get the Unilit... Nov 16 2013, 06:58 PM Dave_Darling When you say that the throttle is sticking, do you... Nov 16 2013, 06:59 PM wndsnd
When you say that the throttle is sticking, do yo... Nov 16 2013, 07:01 PM Mike Bellis Dave meant to check for vacuum leaks at the carb m... Nov 16 2013, 07:07 PM wndsnd
Dave meant to check for vacuum leaks at the carb ... Nov 16 2013, 07:09 PM r_towle Oh....
How is the gas pedal itself?
It also has a... Nov 16 2013, 07:14 PM wndsnd
Oh....
How is the gas pedal itself?
It also has ... Nov 16 2013, 07:19 PM r_towle Pull the rod out of the back of the pedal.
Does th... Nov 16 2013, 07:22 PM wndsnd You are probably right.
Figures the one part on t... Nov 16 2013, 07:33 PM euro911 Aside from the other suggestions, I would reinstal... Nov 16 2013, 11:11 PM wndsnd I went to the parts bin and found another original... Nov 17 2013, 01:34 PM euro911 Cool. Enjoy driving it now :driving: Nov 17 2013, 02:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 08:12 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.