 electrical connectors |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jimkelly |
 Nov 25 2013, 01:58 PM
Post
#1
|
|
Delaware USA  Group: Members Posts: 4,969 Joined: 5-August 04 From: Delaware, USA Member No.: 2,460 Region Association: MidAtlantic Region  |
I am starting to think these may be the best way to go.
insulated heat shrink connectors along with one good ratcheting insulated connector crimper, for all male, female and butt connectors 22-18, 16-14, 12-10. vs bouncing from tool to tool, depending on size of connector and style of connector. pic is of an low dollar partially insulated connector, not a fully insulated heat shrink style connector. also good to know that the bump on the crimper should be on the opposite side of the seam on the connector. but you guys already knew this : ) https://www.youtube.com/watch?v=CS_YS-F9Z2E this also looks like a handy tool to have as well for the heavy guage stuff. https://www.youtube.com/watch?v=nxavPsio2iw Attached image(s) 
|
   |
 
|
Posts in this topic
jimkelly electrical connectors Nov 25 2013, 01:58 PM
BIGKAT_83 Nice hooters. Had to watch it 3 times. :Qarl: Nov 25 2013, 02:03 PM JmuRiz Those finger talons are creepy. Nov 25 2013, 02:09 PM Jeff Bowlsby I dunno....
Depending on your application, no pro... Nov 25 2013, 02:45 PM jimkelly "no problem with them technically"
this... Nov 25 2013, 03:07 PM AfricanHijinx I am impressed that she could do anything with tho... Nov 25 2013, 03:21 PM bulitt I always crimp, then solder. Nov 25 2013, 03:30 PM jd74914 I always use real ratching crimpers (certainly not... Nov 25 2013, 05:08 PM 76-914 3M makes some really nice connectors. Pricey but n... Nov 25 2013, 05:25 PM Mike Bellis I just looked at their website. It is pretty much ... Nov 25 2013, 08:04 PM Jeffs9146
I love those crimpers on the bottom!! Th... Nov 25 2013, 09:07 PM mikesmith Shrink & crimp is good for lugs; it keeps mois... Nov 25 2013, 09:30 PM falcor75 +1 on the crimp and shrink but never solder, solde... Nov 26 2013, 12:40 AM mikesmith MTA in Italy make some very nice parts that would ... Nov 26 2013, 02:14 AM jimkelly turns out the 3M ones are available on ebay CHEAP
... Nov 26 2013, 06:23 AM
mikesmith
turns out the 3M ones are available on ebay CHEAP... Nov 26 2013, 11:25 AM jimkelly wow- so much to know - to do it right - never exp... Nov 26 2013, 01:23 PM mikesmith
wow- so much to know - to do it right - never ex... Nov 26 2013, 03:00 PM Drums66 .....As long as they have insulation(sold-her) :po... Nov 26 2013, 01:48 PM jimkelly the connectors this thread is about - are UNSOLDER... Nov 26 2013, 02:26 PM stugray I did the following when I rebuilt my entire harne... Nov 26 2013, 04:32 PM Spoke
I did the following when I rebuilt my entire harn... Nov 27 2013, 04:11 AM OU8AVW ANCOR is the brand we use in the marine industry. ... Nov 26 2013, 06:36 PM mikesmith The 3M shrink connectors pictured above also conta... Nov 26 2013, 06:46 PM jimkelly ancor - must be great quality - but very pricey... Nov 27 2013, 06:41 AM Mike Bellis The good shit...
http://www.nationalstandardparts... Nov 27 2013, 09:28 AM Tom A properly soldered electrical connection is a str... Nov 27 2013, 12:47 PM stugray And if you soldered the wires underneath the yello... Nov 27 2013, 02:06 PM jimkelly i'm sold.
the waytek crimper and 3m connector... Nov 27 2013, 02:39 PM Tom Stugray,
Yep, exactly why I did it and the nylo... Nov 27 2013, 03:11 PM Katmanken No solder. The military did a huge long duration ... Nov 27 2013, 05:57 PM stugray
solder looks flowed properly,but how you could d... Nov 27 2013, 07:00 PM jimkelly my guess is tom just dripped a little molten solde... Nov 27 2013, 07:45 PM Tom Jim,
No, I use a pricey temperature controlle... Nov 27 2013, 08:18 PM Dave_Darling I do think that, for most of us, crimping the conn... Nov 28 2013, 11:29 AM jeff These are the connectors I like and use, I'm n... Nov 28 2013, 11:49 AM mikesmith [edit: no point beating a dead horse, sorry] Nov 28 2013, 02:44 PM Mike Bellis
[edit: no point beating a dead horse, sorry]
:ag... Nov 28 2013, 04:14 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 10:25 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.