 request a lesson on engine timing |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| type47 |
 Dec 8 2013, 08:09 AM
Post
#1
|
|
Viermeister  Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region  |
I'd like to know on what parameters does the timing of an engine depend: induction? cam? I am resurrecting a 2L with a carb cam and installing a CIS basic system. We started the engine at the ECC in Oct and am progressing very slowly. I think the engine has an 009 dizzy (engine is still at ECC site so can't check now); at least it has a non-vacuum advance dizzy. I have a 2L D-Jet dizzy ready to install and that will probably be one of the next steps. When we started the engine, it did not sound smooth running but it started and that was the intent at the time,
http://www.youtube.com/watch?v=gRLyDnp7G_0#t=15 but there could be other things that caused that. My question is really to what specs do I time the engine; 27 degrees @ 3500 rpm like a D-Jet?  |
   |
 
|
Posts in this topic
type47 request a lesson on engine timing Dec 8 2013, 08:09 AM
The Cabinetmaker Since I built my 2056 with raby 9550 cam and 9:1 c... Dec 8 2013, 09:39 AM gothspeed recheck the valve adjustment to make sure they are... Dec 8 2013, 09:21 PM euro911 Where did you get that CIS system?
:popcorn: Dec 8 2013, 09:48 PM gothspeed I will take a guess that CIS came from an early GT... Dec 9 2013, 05:40 AM type47 The CIS fuel distributor in the video is from an e... Dec 9 2013, 06:42 AM dlee6204 Jim, I had almost the same question when I was tun... Dec 9 2013, 06:55 AM
type47
... you just have to find where it runs best. Wit... Dec 9 2013, 07:43 AM gothspeed Here is another type IV with CIS project. There m... Dec 9 2013, 01:26 PM r_towle Let's see.
The 009 advance curve is just plain... Dec 9 2013, 05:52 PM euro911 Back in the early '70's, I installed a che... Dec 9 2013, 06:05 PM injunmort euro, that is how indian and dusenberg did it. ad... Dec 9 2013, 07:23 PM gothspeed
euro, that is how indian and dusenberg did it. a... Dec 9 2013, 07:55 PM euro911 euro, that is how indian and dusenberg did it. ..... Dec 9 2013, 09:43 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th May 2024 - 12:33 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.