 No Brake Lights?FIXED!, Every other light is functioning properly. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Vysoc |
 Feb 2 2014, 04:44 PM
Post
#1
|
|
Vysoc  Group: Members Posts: 586 Joined: 27-August 09 From: Young Harris, Georgia Member No.: 10,737 Region Association: South East States  |
Hello,
Just enjoying the PreSuper Bowl when I noticed my brake lights were not lighting up? The rear running lights light up when the lights come on, the turn signals work, the hazards work, the fogs work, The back-up light works. I checked the fuses all good, I checked the bulbs all good. I looked at the connections at the rear lights and good on both sides. I checked under the pedals and the wires are connected to the brake sensor or sending unit. Could the sending unit at the brake pedal maybe have gone bad or is there a relay or something I am missing? Thanks, Vysoc (IMG:style_emoticons/default/flag.gif) |
   |
 
|
Posts in this topic
Vysoc No Brake Lights?FIXED! Feb 2 2014, 04:44 PM
rhodyguy the arm on the light switch may be on the wrong si... Feb 3 2014, 08:54 AM Mblizzard As Kevin pointed out, that switch can be tricky... Feb 3 2014, 12:10 PM Vysoc Thanks for the ideas, I will get at it later this ... Feb 3 2014, 01:45 PM r_towle Have you worked backwards from the brake light bul... Feb 3 2014, 01:48 PM Vysoc Thanks for the great leads.
I jumped on this toni... Feb 3 2014, 07:26 PM r_towle Bad grounds and possibly corrosion inside the bulb... Feb 3 2014, 08:31 PM dangrouche instead of that dremel, I make my own sanding ... Feb 3 2014, 09:01 PM Vysoc Ok,
Took out the running light and brake light bul... Feb 4 2014, 05:50 PM r_towle Grounds.
Chassis grounds may need to be cleaned.
... Feb 4 2014, 06:07 PM Vysoc Tomorrow ...Fluke Meter and checking of power all ... Feb 4 2014, 08:07 PM euro911 Are you sure you have the bulbs in correctly? If y... Feb 5 2014, 05:08 AM Vysoc Basically the bulbs are designed to only go in one... Feb 5 2014, 07:49 PM
Vysoc OK........... PROBLEM SOLVED
I have been messing ... Feb 8 2014, 05:00 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th May 2024 - 07:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.