 Gas Tank Sealer |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RobertD |
 Feb 3 2014, 09:14 AM
Post
#1
|
|
RobertD  Group: Members Posts: 21 Joined: 23-September 03 From: Independence, KY Member No.: 1,188 Region Association: None  |
Tying to fight the winters grip here in KY, so the minds loose and wondering. Working on my old 914 project, at least in my mind for now, but I have a question that maybe someone else can answer.
I have my gas tank removed from the car and I wish to seal the inside of the tank with any of the gas tank coating kits on the market, to of course prevent any rust in the fuel system. My question is it might be months or more before the tank will be put back into service. I haven't found anything out about if this will cause any problems? I mean setting dry without gas in it? I would think that the sealer would cure better that way? Any thoughts? Thanks Robert in cold and snowy KY |
   |
 
|
Posts in this topic
RobertD Gas Tank Sealer Feb 3 2014, 09:14 AM
ConeDodger I used the POR15 gas tank kit and when done, it ha... Feb 3 2014, 09:16 AM
TeenerTim
I used the POR15 gas tank kit and when done, it h... Feb 4 2014, 05:22 PM Cap'n Krusty Be VERY aware of the recommended temperature restr... Feb 3 2014, 09:34 AM Socalandy I used Red Coat on my last two 914's with no i... Feb 3 2014, 10:05 AM Cap'n Krusty
I used Red Coat on my last two 914's with no ... Feb 3 2014, 02:49 PM McMark I only use the Caswell epoxy sealer. I poured the... Feb 3 2014, 01:05 PM r_towle
I only use the Caswell epoxy sealer. I poured th... Feb 3 2014, 01:31 PM ConeDodger
I only use the Caswell epoxy sealer. I poured th... Feb 3 2014, 01:39 PM r_towle
[quote name='McMark' post='1992696' date='Feb 3 2... Feb 3 2014, 01:52 PM McMark so if you seal enough customer tanks, your whole g... Feb 3 2014, 06:03 PM jd74914
I only use the Caswell epoxy sealer. I poured th... Feb 3 2014, 05:00 PM Vysoc The Caswell stuff looks pretty darn nice, I have o... Feb 3 2014, 01:37 PM OU8AVW I have an old potato peeler machine that I need to... Feb 3 2014, 02:41 PM Bartlett 914
I have an old potato peeler machine that I need t... Feb 3 2014, 04:15 PM Pat Garvey
I have an old potato peeler machine that I need ... Feb 4 2014, 07:17 PM Elliot Cannon In a "while I'm in there and the engine i... Feb 4 2014, 12:22 AM tod914 The Redcoat that Andy suggested, is likely the sam... Feb 8 2014, 02:03 AM CptTripps From all the threads here on this subject, the pro... Feb 8 2014, 03:32 AM McMark You don't really need the gravel portion. Use... Feb 8 2014, 02:56 PM CptTripps
I'll pick you up at the airport. If you keep... Feb 8 2014, 07:20 PM smveril Hi Robert,
We used the KBS tank cleaner and seale... Feb 8 2014, 04:11 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 01:03 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.