 center tunnel strength |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mrbubblehead |
 Feb 17 2014, 11:56 AM
Post
#1
|
|
Twodollardoug  Group: Members Posts: 1,155 Joined: 17-December 10 From: calimesa ca. Member No.: 12,492 Region Association: Southern California  |
I am wondering how strong the center tunnel is. after seam welding and the inner long kit, would it be ok to cut the top off for access panels? they will be replaced with aluminum panels fastened with rivnuts and 5mm screws. im leaving most of shifter sheet metal to keep the shifter solid. you can see from the pictures what i intend to cut out. (IMG:http://www.914world.com/bbs2/uploads_offsite/i722.photobucket.com-12492-1392659784.1.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i722.photobucket.com-12492-1392659784.2.jpg) |
   |
 
|
Posts in this topic
mrbubblehead center tunnel strength Feb 17 2014, 11:56 AM
Old Yella Aluminium and steel react causing both metals to c... Feb 17 2014, 12:20 PM bulitt Brant simply drilled access holes.
http://www.914... Feb 17 2014, 01:00 PM CptTripps Interesting idea. Looks like you'll lose the p... Feb 17 2014, 01:04 PM
mrbubblehead
Interesting idea. Looks like you'll lose the ... Feb 17 2014, 01:17 PM SirAndy capt, i dont use a pedal board....
That seems lik... Feb 17 2014, 02:13 PM mrbubblehead
capt, i dont use a pedal board....
That seems li... Feb 17 2014, 02:37 PM SirAndy i havnt used a pedal board in any of my cars in ye... Feb 17 2014, 03:58 PM mrbubblehead ya, thats where my idea came from. at first i thou... Feb 17 2014, 01:14 PM worn
I am wondering how strong the center tunnel is. a... Feb 17 2014, 02:20 PM mrbubblehead my drawings dont show them, but all of the angles ... Feb 17 2014, 02:36 PM Cap'n Krusty Without the pedal board, what do you use for pedal... Feb 17 2014, 04:32 PM mrbubblehead
Without the pedal board, what do you use for peda... Feb 17 2014, 05:33 PM SirAndy a threaded plastic deal on the end of the clutch p... Feb 17 2014, 05:37 PM mrbubblehead
a threaded plastic deal on the end of the clutch ... Feb 17 2014, 05:40 PM SirAndy how do you figure? :popcorn:
Well, first off, i h... Feb 17 2014, 06:13 PM mrbubblehead
how do you figure? :popcorn:
Well, first off, i ... Feb 17 2014, 06:22 PM SirAndy i'll take my chances.
Getting answers you don... Feb 17 2014, 06:43 PM mrbubblehead
i'll take my chances.
Getting answers you don... Feb 17 2014, 06:44 PM bulitt
[quote name='SirAndy' post='1999666' date='Feb 17... Feb 17 2014, 06:52 PM 76-914 Use some JB Weld on the rivenuts. Just prep the ar... Feb 17 2014, 07:18 PM mrbubblehead
Use some JB Weld on the rivenuts. Just prep the a... Feb 17 2014, 07:24 PM mrbubblehead there. i fixed it... :poke:
http://www.914world.c... Feb 17 2014, 07:19 PM Garland If you need to. Feb 17 2014, 07:48 PM nineonefoursix Ok, here we go again, if your car has carpet, yo... Feb 17 2014, 09:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.