Sun visor rebuild group buy need to do 20 sets, with mirror installed from $104 +shipping CLOSING 4/13 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Sun visor rebuild group buy need to do 20 sets, with mirror installed from $104 +shipping CLOSING 4/13 |
Mikey914 |
Mar 5 2014, 12:36 PM
Post
#1
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
There seems to be enough interest to put another one of these together.
You would be looking at a high quality vinyl that would be stitched on the edges. I know the OEM was thermally bonded, but the cost to set up and do that would double the cost at less that 100 sets. So, they're not exactly like OEM, but they will have the mirror sewn in like the OEM. I will also make new visor clips available if you wish for $50 a set of all 3. These are the ones with the stainless pins. This will be only to those that are in on the visor refurb deal. Just chime in on the thread here to get yourself on the list. As soon as it looks like we've got the 20 sets, I'll send the details. The price for vinyl is $104 with your cores. Please send stripped as shown or there is an additional $10 in cost (any it costs you more to ship). This price is + shipping back at cost. Figure about $10 domestic give or take a few bucks. Attached image(s) |
rmdinmd |
Mar 5 2014, 12:44 PM
Post
#2
|
Member Group: Members Posts: 488 Joined: 30-October 13 From: Greeneville,Tn Member No.: 16,585 Region Association: South East States |
Mine need it bad (IMG:style_emoticons/default/biggrin.gif) so I am in for one.
|
bulitt |
Mar 5 2014, 01:02 PM
Post
#3
|
Achtzylinder Group: Members Posts: 4,188 Joined: 2-October 11 Member No.: 13,632 Region Association: South East States |
I'm in for one set!
|
andys |
Mar 5 2014, 01:05 PM
Post
#4
|
Advanced Member Group: Members Posts: 2,165 Joined: 21-May 03 From: Valencia, CA Member No.: 721 Region Association: None |
I need mine done, so put me in for a set (black). What's the lead time?
Thanks, Andys |
Sprovost |
Mar 5 2014, 01:16 PM
Post
#5
|
Newbie Group: Members Posts: 16 Joined: 20-February 13 From: Salt Lake City Member No.: 15,556 Region Association: Rocky Mountains |
Please count me in for 1 set also.
Thanks, Scott |
GaroldShaffer |
Mar 5 2014, 01:16 PM
Post
#6
|
You bought another 914? Group: Benefactors Posts: 7,620 Joined: 27-June 03 From: Portage, IN Member No.: 865 Region Association: None |
I would be in a for a set.
|
sbsix |
Mar 5 2014, 01:41 PM
Post
#7
|
only the lead dog enjoys a change in scenery... Group: Members Posts: 448 Joined: 10-January 12 From: Santa Barbara, CA Member No.: 13,990 Region Association: Southern California |
I am in for a set, too.
|
ehokana |
Mar 5 2014, 01:47 PM
Post
#8
|
Member Group: Members Posts: 99 Joined: 11-August 13 From: SoCal Member No.: 16,237 Region Association: None |
I'd be in for a set too
|
ehokana |
Mar 5 2014, 01:47 PM
Post
#9
|
Member Group: Members Posts: 99 Joined: 11-August 13 From: SoCal Member No.: 16,237 Region Association: None |
I'd be in for a set too
Sorry for the double post- 'm still getting used to this touch screen |
Mikey914 |
Mar 5 2014, 01:50 PM
Post
#10
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
I need mine done, so put me in for a set (black). What's the lead time? Thanks, Andys It really depends on when we hit 20. Thy all have to be done together, so if guess we could start in 2-3 weeks, and it would be 2 weeks from there. The big issue is I need 20 sets in hand to start. |
sbsix |
Mar 5 2014, 01:53 PM
Post
#11
|
only the lead dog enjoys a change in scenery... Group: Members Posts: 448 Joined: 10-January 12 From: Santa Barbara, CA Member No.: 13,990 Region Association: Southern California |
Mark my guess is that there are hundreds of 914s that need new visors. I don't know where anyone could get a set these days. I've been searching for a set for years to replace mine. At your price, its a no brainer.
|
Scott S |
Mar 5 2014, 01:54 PM
Post
#12
|
Small Member Group: Members Posts: 1,697 Joined: 30-April 03 From: Colorado Member No.: 633 |
Wow - those look great!
You wouldnt happen to be able to a set for a 911 would you?? |
andys |
Mar 5 2014, 01:57 PM
Post
#13
|
Advanced Member Group: Members Posts: 2,165 Joined: 21-May 03 From: Valencia, CA Member No.: 721 Region Association: None |
BTW Mark,
Shouldn't the mirror flap be hinged on the other (bottom) side? You'd want the flap hang down and uncover the mirror without the need to otherwise hold it up. To me, your setup looks upside down. Andys |
Mikey914 |
Mar 5 2014, 02:03 PM
Post
#14
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
|
bandjoey |
Mar 5 2014, 02:06 PM
Post
#15
|
bandjoey Group: Members Posts: 4,923 Joined: 26-September 07 From: Bedford Tx Member No.: 8,156 Region Association: Southwest Region |
In if I can find another core. Using right visor now on drivers side just to have one. Check tonight and let u know.
|
andys |
Mar 5 2014, 02:27 PM
Post
#16
|
Advanced Member Group: Members Posts: 2,165 Joined: 21-May 03 From: Valencia, CA Member No.: 721 Region Association: None |
BTW Mark, Shouldn't the mirror flap be hinged on the other (bottom) side? You'd want the flap hang down and uncover the mirror without the need to otherwise hold it up. To me, your setup looks upside down. Andys Its a passenger side mirror Mark, Yeah, I know it's the pass side, but help me out....Maybe I'm having a senior moment here, but the the photo shows the visor(s) in their mounted and pulled down orientation, correct? Andys |
boogie_man |
Mar 5 2014, 02:30 PM
Post
#17
|
Member Group: Members Posts: 308 Joined: 22-April 11 From: So Cal Member No.: 12,969 Region Association: Southern California |
Will you please stop doing this, every time I think I have all I needed from you, you go and change the game LOL.....great work Mikey !!!!! Can they be done in leather covering instead ???
Thanks Scott |
75-914 |
Mar 5 2014, 03:08 PM
Post
#18
|
Newbie Group: Members Posts: 7 Joined: 4-March 14 From: Prattville, AL Member No.: 17,073 Region Association: None |
There seems to be enough interest to put another one of these together. You would be looking at a high quality vinyl that would be stitched on the edges. I know the OEM was thermally bonded, but the cost to set up and do that would double the cost at less that 100 sets. So, they're not exactly like OEM, but they will have the mirror sewn in like the OEM. I will also make new visor clips available if you wish for $50 a set of all 3. These are the ones with the stainless pins. This will be only to those that are in on the visor refurb deal. Just chime in on the thread here to get yourself on the list. As soon as it looks like we've got the 20 sets, I'll send the details. The price for vinyl is $99 with your cores. Please send stripped as shown or there is an additional $8 in cost (any it costs you more to ship). This price is + shipping back at cost. Figure about $10 domestic give or take a few bucks. Count me in. I want a set. Let me know when where and how much. Thanks! |
ConeDodger |
Mar 5 2014, 03:10 PM
Post
#19
|
Apex killer! Group: Members Posts: 23,558 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California |
I can attest to the quality. I was in on the first group buy and they are outstanding! (IMG:style_emoticons/default/smilie_pokal.gif)
|
rktmn247 |
Mar 5 2014, 03:13 PM
Post
#20
|
Irish Green with GT envy! Group: Members Posts: 347 Joined: 18-August 05 From: Mililani, HI Member No.: 4,612 Region Association: None |
I'm in for a set plus visor clips. Thanks Mark!
|
Lo-Fi Version | Time is now: 25th April 2024 - 04:10 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |