 Closing up Body Holes, a welding question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 76-914 |
 Mar 24 2014, 01:28 PM
Post
#1
|
|
Repeat Offender & Resident Subaru Antagonist  Group: Members Posts: 13,503 Joined: 23-January 09 From: Temecula, CA Member No.: 9,964 Region Association: Southern California 
 |
I've welded up a few small holes (< 5mm) in some obscure areas but now I'm thinking about closing the "wart holes" where the side turn lamps reside and I'm looking for a little guidance. Is it best to weld in a plug of similar thickness doing a little at a time to avoid warping? Also, I plan to add OEM side mirrors once I have "Little Frankie" running and I expect I shall find some holes that need to be filled when I do. Can I just use a backer plate and MIG these w/o fear of warping this area. TIA, Kent
|
   |
 
|
Posts in this topic
76-914 Closing up Body Holes Mar 24 2014, 01:28 PM
CptTripps That's how I did my last one. With the flares,... Mar 24 2014, 02:01 PM scotty b cut a plug. Butt weld it in. A backer is fine on t... Mar 24 2014, 02:42 PM
76-914
cut a plug. Butt weld it in. A backer is fine on ... Mar 24 2014, 02:56 PM scotty b
cut a plug. Butt weld it in. A backer is fine on... Mar 24 2014, 04:24 PM ThePaintedMan More heat necessary with 0.30 wire to achieve pene... Mar 24 2014, 04:10 PM rick 918-S With .023 you can turn down the welder a little mo... Mar 24 2014, 04:26 PM 76-914 Thank you gentlemen, all. :welder: :smash: :saw... Mar 24 2014, 05:16 PM Andyrew Nothing on these unibody cars require larger than ... Mar 24 2014, 06:37 PM Brian_Boss If you need to get some .023 anyway, try to get ... Mar 25 2014, 09:29 AM Andyrew ^This is true, Its a much different weld. The best... Mar 25 2014, 01:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 08:34 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.