![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
dinomium |
![]()
Post
#1
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
Ok, I have went on my own "seekret journey" back from the fringe of FUNK THIS episode of Ugmo's Master Cylender dieing on the jackstands to restart my 914 epic qwest. Yes, I was very klose to throwing in the towel.
Then I remembered how much fun cutting steel is! (IMG:http://www.914world.com/bbs2/html/emoticons/sawzall-smiley.gif) Firewall hell hole is gone! a big chnck on the long -GONE! Upper wheel house gone! This is on the lil red car. Ugmo is still sitting out side under the car cover till it learns its lesson! I have a brand new batt tray and support and some nice steel slabs to fill in the holes. I don't think these are gonna drive to SoCal this April, but I have a hall pass! It is good to BE BACK! (in the shop that is) Attached image(s) ![]() |
dinomium |
![]()
Post
#2
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
really bad hell hole shot: digicam power cell sux!
Attached thumbnail(s) ![]() |
dinomium |
![]()
Post
#3
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
ugmo Meet the guys:
It really looks worse in person, this is the good side! Attached thumbnail(s) ![]() |
skline |
![]()
Post
#4
|
Born to Drive ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California ![]() |
Is Ugmo an LE? What year is it? Mahle wheels, color combination, could be.
|
dinomium |
![]()
Post
#5
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
it's the sooper sexy running boards isn't it? Ugmo is not an LE... it is only a 73. So not the right years... I was very temped to paint the yellow to lime green and yell TAH DA!!! But that would be evil, even for me...
(IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif) funny, but evil. |
skline |
![]()
Post
#6
|
||
Born to Drive ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California ![]() |
I like that idea, if it were mine, I sure would. Just because there are no others like it out there. If there were, you would find out pretty quick when all the others start to appear. Are you saying it is a 73 because of the production date or the VIN number? |
||
dinomium |
![]()
Post
#7
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
seller said it was a "73" I think from the vin it might even be "mostly" a 72... we will know when it comes in for its Rustoration after the red car...
Red car needs a better name too... any thoughts? |
skline |
![]()
Post
#8
|
Born to Drive ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,910 Joined: 26-December 02 From: Costa Mesa, CA Member No.: 17 Region Association: Southern California ![]() |
Well, what are the first 3 of the VIN? That will tell for sure.
|
dinomium |
![]()
Post
#9
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
I will check and get back to you all the data is in the shop...
if anybody was wondering about my breakdown: ugmobreakdown thread |
Trekkor |
![]()
Post
#10
|
I do things... ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California ![]() |
Oooooo (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif)
That rust...Where have I seen that before (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) KT |
dinomium |
![]()
Post
#11
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
yup, KT, it was your thread that got me off my a$$ and back to the shop. I should have you send me your templates.
|
Trekkor |
![]()
Post
#12
|
I do things... ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California ![]() |
I still have them and need to send a set to another clubber as well.
Send me an address, and they're yours. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) KT |
morph |
![]()
Post
#13
|
quality parts builder ![]() ![]() ![]() Group: Members Posts: 1,828 Joined: 25-November 03 From: oregon coast Member No.: 1,389 Region Association: Pacific Northwest ![]() |
nice lookin car dino.i need to stop by there some time when im up seattle way.have a beer or two and play with youre cars. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
james |
SteveL |
![]()
Post
#14
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 658 Joined: 7-August 03 From: Andover, MN Member No.: 991 Region Association: None ![]() ![]() |
Hey, what is the story of the other white one under the blue tarp behind Ugmo? Fuchs 5 lugs?.....Tell us more!
(IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) |
Root_Werks |
![]()
Post
#15
|
Village Idiot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,338 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest ![]() ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) Good job getting started Dino! Keep the pictures coming! (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif)
|
IronHillRestorations |
![]()
Post
#16
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,732 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None ![]() ![]() |
Bad rust, where?? Gee, if you can still see the engine shelf, and the hole isn't big enough to drop the ECU into, it's not too bad (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
That's a great car for alot of the salt belt guys. |
dinomium |
![]()
Post
#17
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
Thanks guys.
The car under the tarp is a "donor" car. I got it for free with Ugmo. The five lugs are faux Fuchs. The PO started to turn it into a V8 project buy cutting the car apart so now the few good parts are going on the other two. Anybody need doors or front fenders? |
Trekkor |
![]()
Post
#18
|
I do things... ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California ![]() |
templates coming...Gratis!
KT |
red914 |
![]()
Post
#19
|
...i believe in coyotes and time as an abstract... ![]() ![]() ![]() Group: Members Posts: 862 Joined: 8-February 04 From: poulsbo, washington Member No.: 1,641 ![]() |
WOW, dino, ugmo sure is photogenic. you should post a full side shot of the other side, so that the soopersexy side scoop is visible. but maybe not, as that will just start a panic amongst the members to make their own!
and the photo of the other side of the cutout is where? oh, and KT, when dino gets around to coaching me through the rust repair on my hellhole, can we use your templates there, too? i like to get permission rather than seek forgiveness... |
dinomium |
![]()
Post
#20
|
Git on a chair son, all the good stuff is goin over yer head! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,777 Joined: 2-January 03 From: Bremerton, WA Member No.: 74 Region Association: Pacific Northwest ![]() ![]() |
Dont have a full profile, but I do have this lovely close up. The scoop does nothing but look really sweet!
Attached image(s) ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 15th June 2024 - 09:43 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |