 Hard Shifting |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| lsintampa |
 Aug 1 2014, 02:17 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 520 Joined: 28-January 13 From: Tampa, FL Member No.: 15,441 Region Association: South East States  |
75 2.0
I can shift into all gears, but shifting is hard... What I mean by hard is that I need to put some muscle into getting the car into some of the gears. 1st - grinds just about every time I try to get it in. 2nd - easiest to shift into 3rd - hard to engage 4th - harder to engage than 3rd 5th - hard to engage Aside from that, there have been times that it was equally hard to get it out of a gear. New bushings - adjusted shift pattern I think correctly. Car is new to me and has only been running (motor rebuild recently) maybe 400 miles since the rebuild. I did have the tranny axle seals replaced - but that's about all that's been done to it. |
   |
 
|
Posts in this topic
lsintampa Hard Shifting Aug 1 2014, 02:17 PM
Mblizzard Sounds like you need to move the shift lever coupl... Aug 1 2014, 03:03 PM Mblizzard Also look to be sure your shift tube has not come ... Aug 1 2014, 03:08 PM
lsintampa
Also look to be sure your shift tube has not come... Aug 1 2014, 03:21 PM RoadGlue What type of gear oil are you running?
Condition... Aug 1 2014, 03:48 PM Cap'n Krusty Adjust the clutch before you do anything else. Lo... Aug 1 2014, 03:53 PM Dave_Darling
Adjust the clutch before you do anything else.
... Aug 1 2014, 04:09 PM Dr Evil
Adjust the clutch before you do anything else.
... Aug 2 2014, 06:42 PM URY914 Check the cone screws in the front and rear rod co... Aug 1 2014, 03:56 PM 76-914 :agree: w/ DD and Cap'n K Aug 1 2014, 04:16 PM Dr Evil Also, see if it grinds in reverse. If so, you have... Aug 2 2014, 06:43 PM lsintampa
Also, see if it grinds in reverse. If so, you hav... Aug 3 2014, 07:33 AM Dr Evil Only adjust the clutch first. The clutch should st... Aug 3 2014, 08:07 AM lsintampa Much better - maybe 90%
The clutch cable was NOT ... Aug 3 2014, 12:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 04:01 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.