 Is door gap widening when car is lifted normal? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| doug_b_928 |
 Aug 10 2014, 08:10 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 692 Joined: 17-January 13 From: Winnipeg Member No.: 15,382 Region Association: Canada  |
I lifted my car for the first time today. The longs have rust and the gap at the top of the door widened (the weight of the rear of the car was pulling it down such that the door gap opened more at the top (see pic below).
 I'd say it was double what it is when the wheels are on the ground. So, I won't be surprised if this is because of the rust having weakened the chassis (in fact, I'm glad that it didn't snap off completely), but I'm wondering if some widening like this is normal when the car is lifted from the jack point areas (i.e., using a two post lift) and, if so, how much one should expect. |
   |
 
|
Posts in this topic
doug_b_928 Is door gap widening when car is lifted normal? Aug 10 2014, 08:10 PM
flash914 The car new would have none- no change. Joe Sharp ... Aug 10 2014, 08:27 PM Vacca Rabite :agree:
That car has cancer. Probably bad if the ... Aug 10 2014, 08:44 PM scotty b bad news. All that bubbling under the gold decal i... Aug 10 2014, 09:03 PM doug_b_928 Yes, the car has lots of cancer. Good to know tha... Aug 10 2014, 09:18 PM rick 918-S Straight to repairs. Don't mess with it too mu... Aug 10 2014, 09:28 PM brant You better asses or post pics
It might not be safe... Aug 10 2014, 09:46 PM SirAndy Is door gap widening when car is lifted normal?
... Aug 10 2014, 11:25 PM
Jonathan Livesay
Is door gap widening when car is lifted normal?
... Dec 11 2014, 11:22 AM
stevegm
[quote name='SirAndy' post='2072402' date='Aug 10... Dec 12 2014, 07:12 AM siverson I agree that Doug B's photo looks really bad a... Dec 12 2014, 11:32 AM doug_b_928 Thanks for the feedback guys. I removed the engin... Aug 11 2014, 05:54 AM 76-914 It's time to start shopping for a CA or AZ rol... Aug 11 2014, 07:55 AM doug_b_928 But that would be too easy :) Aug 11 2014, 07:59 AM Dave_Darling OK, then shop for a welder!
--DD Aug 11 2014, 08:18 AM doug_b_928 Check :) Aug 11 2014, 08:40 AM Chris H. And once you assess and get a welder go here:
Res... Aug 11 2014, 05:47 PM doug_b_928 Yeah, that's the plan. BTW, the reason I... Aug 11 2014, 05:55 PM cary
Yeah, that's the plan. BTW, the reason I... Dec 11 2014, 09:37 AM stugray
the reason I'm not planning to go the roller... Aug 11 2014, 06:11 PM Chris H. That's understandable. The good news is that ... Aug 11 2014, 06:13 PM doug_b_928 Yeah, I've already been in touch with Rick and... Aug 11 2014, 06:20 PM doug_b_928 Stugray, sorry I didn't see your post. This w... Aug 11 2014, 06:23 PM mepstein Nothing that a lot of time and money won't fix... Aug 11 2014, 07:47 PM doug_b_928 Thanks. I'm eager to learn. Aug 11 2014, 08:10 PM SirAndy Post some pics of your passenger side longs. In yo... Aug 11 2014, 08:35 PM doug_b_928 I don't have pics on this computer, but if you... Aug 11 2014, 10:07 PM Claus Graf Had I done the test of opening the doors and jumpi... Dec 11 2014, 08:40 AM Philip W.
Had I done the test of opening the doors and jump... Dec 11 2014, 09:00 AM Claus Graf
Had I done the test of opening the doors and jum... Dec 12 2014, 07:08 AM worn
Had I done the test of opening the doors and jump... Dec 21 2014, 07:52 PM wndsnd Shhhhhhhhhhhh.......
Yep.
and this is 8 inches [... Dec 11 2014, 08:59 AM IVGUY "I noticed yesterday that it even has a block... Dec 11 2014, 07:29 PM Cairo94507 The good news is once you fix it correctly, you wi... Dec 12 2014, 08:02 AM doug_b_928 I built a bench a la Hail and put the car on it. ... Dec 12 2014, 10:13 AM bandjoey Pull up the restoration thread. Many cars there sa... Dec 12 2014, 11:27 AM Claus Graf This is what my longs looked like. Had some sheetm... Dec 19 2014, 06:46 AM siverson I guess you just needed some thicker fiberglass... Dec 19 2014, 05:45 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th April 2024 - 03:19 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.